YORK S1-0242753 S1-0242753 CONTACTOR 1 POLE W/SHUNT,30A,24V

CONTACTOR 1 POLE W/SHUNT,30A,24V

The S1-0242753 CONTACTOR 1 POLE W/SHUNT,30A,24V from York is designed to deliver complete protection for contactors. 1 Feeder closure for direct connection of busbar, 1 Protection against short-circuit currents, 1 Earthing and earth fault protection through switchable resistors and earth fault trip.

Our YORK® S1-0242753 CONTACTOR 1 POLE W/SHUNT,30A,24V is ideal for protection and control of both motors and generators. The contactor includes an integral current shunt trip that protects against overcurrent from a short circuit or overload fault. The blowout proof contacts are designed so that if the system is subjected to a momentary short circuit or overload condition so that current in the coil circuit exceeds the holding current of the shunt trip

Contactor 1 pole is rated 30A,24V AC-NC Contactor Dimension is 3.25" H x 3.25" W x 2.5 D Contactor construction material: Metal (body) features: Fiberglass handle and mounting bracket Actuator: Wire lead Size: 1 pole/1A Rating: 30 Amps Voltage: 24 Volts Shunt Trip Type: Isolation Trip Mounting Position: Any Rod Size: #8-32

The York 001-S1-0242753 contactor is a single pole 30 amp contatctor with a shunt trip. The contact has a B size bushing and screws directly onto the bushing. It also has an operating voltgae of 24 volts. The contact is UL and CSA listed. The main frame size is "B" and the contact is not covered under the NEMA. It is rated for 600 volts and can handle 29 amps of current.

The S1-0242753 is a 1 pole 30 amp 24V AC Contactor.

The S1-0242753 is a contactor for use with the York USMC 1.5, 2.0 and 3.0 air conditioners and heat pumps. This contactor has one pole and a 30 Amp shunt trip with a 24 Volt coil voltage.

The York S1-0242753 contactor is designed for permanent magnetic motor control. For use with 240V single phase motors. 1 pole, 30A, 24 VDC coil, N/O contacts with dry-interrupt protection. CSA/UL listed.