York 143751 S1-025-23083-000 TERMINAL BLOCK 2 POLE 300V 20A

BLOCK,TERMINAL, 2 POLE 300V 20 AMP

RJ45 TERMINAL BLOCK. INSULATED, 2 POLE, 300 VAC 20 AMP.,COATED W/ RESIN, POLYCARBONATE HOUSING

Includes one 2 pole 300V 20 amp terminal block plus mounting hardware. Used on the XFP and XFP-10G systems.

The YORK 143751 S1-025-23083-000 is a 2 pole terminal block for use with 20 Amp equipment. The block has a NC machined brass body, zinc plated steel contact screws, and nickel plated copper alloy bushings.

This 2 pole, 20 Amp terminal block from York is highlighted by a 1/4 in. solid copper bus. Designed for use in industrial applications where moderate current and resistance is required, this solid copper terminal block provides the heat dissipation required for long wire runs and heavy duty loads.

Add convenient, wire-through connections to your next job with the York S1-025 20A 2-pole terminal block. This terminal block comes in handy for everything from home theater systems to commercial lighting and can be quickly wired using twist-on wire connectors.

These terminal blocks make wiring easy, no matter how many wires you have to connect. They feature two 2-pole outlets that accept plugs up to 0.25 in diameter and three mounting holes for permanent or semi-permanent installation.

Whether you're connecting ungrounded equipment or controlling circuits where you need to protect your wiring from surges or spikes, this terminal block has you covered.

If you need a simple and cost effective way to connect and disconnect one or more pieces of electrical equipment, consider using a terminal block. Terminal blocks are easy to use and install, it saves you time and money, and the selection from York is superb.

ELV RCBO/RCD TERMINAL BLOCK

This block comes with two positive, two negative crimp contact terminals, and a cover.

This series of terminal blocks offers you the ability to wire more devices using less wiring by providing 2-wire connections per screw. By providing two separate two wire connections for each screw (as opposed to one), you can use this product as a circuit breaker by connecting the wires as opposite polarity. If a short is present in the wiring, it will open both connections since they are wired in opposite polarity. This can save both time and money when wiring your next project.

Installing your electrical components can be a challenge without the help of convenient terminal blocks. The YORK 1500 Series accepts wire sizes from 16 to 8 AWG and features an open design that is easy to work with.