York 144071 S1-025-30827-000 PRESSURE TRANSDUCER

TRANSDUCER,PRESSURE

This transducer is for use in monitoring the pressure in a pressurized tank. Once installed in the tank, it will measure the pressure and pump this data to a monitor inside the building. This transducer is brand new, in its original packaging. The transducer offers serial inputs so that you can connect with other accessories in the building, such as pumps and control valves. It is powered by an external power supply that is not included with the transducer.

This is a pressure transducer. The electrical signal output of the transducer is proportional to the difference between its input pressure and atmospheric pressure. It is intended for use with an optional controller purchased separately.

The York YS1-025-30827-000 Pressure Transducer is a high quality replacement for your broken or damaged sensor. This product ensures that it will last the same as the original. This transducer meets all FDA standards, has a body diameter of 0.500", and a sensor length of 0.190", which allows for a good fit with most pressure transmitters. The maximum operating pressure is 10 psig, and a maximal flow rate of 2 L/s, for a good flow rate with your system requirements.

The S1-054-30827-000 Pressure Transducer is a high accuracy, pressure measurement transducer that converts the pressure in the process into an electrical signal.

Set your pressure with these face mount transducers in a variety of ranges.

The ultra-compact, high performance York® 144071 Digital Pressure Transducer measures pressure from approximately 0 to 2200 psi and is suitable for a wide variety of applications, including those applications requiring a high degree of accuracy and resolution. The 144072 addresses slightly different pressure ranges slightly lower in application pressures. Both provide superior long term stability, very accurate measurements and three way mounting flexibility.

The York 144071 S1-025-30827-000 pressure transducer is a replacement part for the York YR5F 50DXV furnace. It features N/C or N/O signal output, 4 wire design for enhanced durability, and 0 to 5 PSI operating range.