York 144673 S1-025-39876-000 ECM Motor Harness

HARNESS,MOTOR CONTROL,ECM

The York B142 ECM Motor Control Harness is a replacement product from the original manufacturer. It has been engineered to meet or exceed the original equipment manufacturers specifications to ensure high quality and reliable operation.

This ECM Motor Harness is product to remove and replace a defective motor control circuit board assembly. It is the product to remove and replace a defective motor control circuit board assembly. It is used in various applications.

A replacement Motor Control Harness for the York ECM (York part number 144673, model number S1-025-39876-000). This harness is used in many older York furnaces.

The 144673 S1-025-39876-000 ECM motor harness is designed for use with many brands of equipment.

The York ECM Motor Harness is designed for use with the following York Air Conditioner models: S-210/S-212/S-220/S-230/S-240/S-252. A 2 wire hookup from the potentiometer is provided for ease of replacement.

The motor control harness starts at the ECM connector and goes to the reversing valve connector. It then goes to the hydrostatic pump connectors. From there, it goes to the power input module, solenoid power supply connector, and control box connector.

The York ECM Motor Control Modules eliminate all start and run capstans, belt pulleys and shafts, thereby reducing the number of moving parts to just the fan wheel and motor. This design also eliminates vibration transmission to the structure, resulting in a smooth operation and floor less noise

This is an original equipment manufacturer (OEM) part. #1 in the diagram is the ECM (Engine Control Module). #2 is the harness. The OEM part number for this harness is 144673. The harness's function is to transfer or supply voltage from one place to another or to connect two or more electrical components together.

The S1-025-39876-000 Motor Harness is a genuine OEM replacement part that fits the following models:

The small-sized ECM, designed for high engine speeds and high engine power, weighs only 30 lbs. Featuring a compact size and a wide range input voltage range of 18-56 VDC, this ECM is easy to install. It can even be mounted to a bulkhead with its built-in mounting holes for easy installation. And its integrated fault detection system is simple to operate and debug.

This device incorporates device incorporates an electronic circuit for controlling the speed of the compressor in response to signals received from the system control circuit.

The York S1 is a high output, easy to install condensing unit. This unit has advanced technology and can be installed in your existing furnace and operates as the current thermostat and safety system. These units will heat and cool your home with minimal energy loss and no disruption to your day.