YORK S1-02541249000 CNTRL,FAN&LIMIT,200 DEG-60 DEG CNTRL,FAN&LIMIT,200 DEG-60 D

CNTRL,FAN&LIMIT,200 DEG-60 DEG

The York CNTRL,FAN&LIMIT,200 DEG-60 DEG control range hood comes equipped with a powerful 5.75" fan and 4 small halogen lights that provide bright, accurate and efficient lighting in any kitchen or food service facility. It also contains a powerful 300 CFM blower motor and is an economical choice when compared to the cost of installing ducts to move air from central ventilation units. The York CNTRL,FAN&LIMIT,200 DEG-60 DEG is especially ideal for commercial kitchens, hospitals, dining halls or hotel kitchens where the potential

This YS1M1 is a CNTRL,FAN&LIMIT,200 DEG-60 DEG control used on York furnaces. This is not a complete listing of all units manufactured by the manufacturer. If you do not see your unit listed and have a question about compatibility please call us at 1-800-321-1484.

The YORK S1-02541249000 CNTRL,FAN&LIMIT,200 DEG-60 DEG CNTRL,FAN&LIMIT,200 DEG-60 DEG from York is a direct replacement for your flush mounted part. This device is installed inside the machine to regulate the fan speed by using control outputs based on temperature control and limit settings.

The York Commercial Rooftop Unit with Control, Fan & Limit, 200 Degree – 60 Degree Control is ideal for light commercial applications such as condominium HVAC installations in both residential and non-residential buildings. The unit is designed for easy installation on light commercial roofing materials and features all of the same great quality components you would expect from a York. The unit features a galvanized steel cabinet with rugged weather resistant paint finish.

The YORK Control, Fan-and-Limit switch is a high quality replacement for all York furnaces. This durable switch has 200 degree motor limit and control wire jumper. It features a universal design that can fit into any York or Dukane furnace too.

Controls are designed for fan operation up to 200 degrees at a time. The limit control is designed to stop operation when the temperature reaches 60 degrees, or if power failure occurs.

A 200-degree control with limit switch can be connected to an optional limit control. The control connects to the drive assembly for feedback of the system position. Refer to the installation drawing for a wire connecting diagram.