YORK S1-02541330000 CNTRL,TEMP,26 OPEN,38 CLOSE,SPST CNTRL,TEMP,26 OPEN,38 CLOS

CNTRL,TEMP,26 OPEN,38 CLOSE,SPST

The YORK S1-02541330000 CNTRL,TEMP,26 OPEN,38 CLOSE,SPST combination valves are control valves used to control flow of both hot and cold water. They provide two separate circuits to deliver both hot and cold water to any room in the home or building. The valves can be installed on many pipe sizes including 1/2 inch, 3/4 inch, 1 inch, and 2 inches providing flexibility in its use. The set point of the valve is adjusted via an external lever that adjusts down or up.

The YORK S1-02541330000 OPERATOR'S MANUAL CENTRAL CONTROL, TEMP 26 OPEN & 38 CLOSE, SPST document details the operation of the central control and temperature control assembly.

The S1-02541330000 is a York, wall mount, thermostatic radiator valve that provides adjustable temperature levels. It has 2/26/38 position of control for room temperature range, installed without sweat connections on copper pipe, steel pipe or plastic pipe with G ¾ inch sweat connections.

The York Control, Temperature, Center Pole Mounted Swing Door Operator is designed for use on between 26" to 38" square openings. The design is simple with two separate swing doors that are hinged at the top. The door is held closed by a spring tension arm attached to the operator's drive mechanism located behind the unit on the ceiling. This pressure arm will hold the door closed until the operator's controller releases it. The door can also be made to stay open using a timer on the operator's control box.

This simple manually operated two pole control uses a normally open and normally closed contact combination to control one or two air valves. When the normally closed contact opens, it turns the air to the heating chamber on; when the normally open contact closes it turns the air to the heating chamber off. This switching device is often used in conjunction with a thermostat in plumbing and refrigeration applications where there must be complete temperature control to ensure your system operates properly

The YORK S1 Basic Controls address a wide range of single-pole applications where the controller is to be used as a Normally Closed or Normally Open device.

Convenient control in a simple, in a single-gang box.

Create controlled or continuous filtered airflow with York’s control valves. They are designed to be used with YORK Commercial Air Handler coil systems and external mixing boxes, which use 2-way valves for controlling airflow to your indoor unit through the use of heating and cooling coils.

For use with York YLH Z1-H100B-18 ,York YLH Z1-G100A-19,York YLH Z1-G100B-19,York YLH Z1-H100TA-19 , York YLH Z1-H110A-17, York YLH Z1-G110A-19,York YLH Z1-G110BA-19,York YLH Z1-G110TA-19

York Commercial Controls provides Energy Management Solutions for heating, ventilation and air conditioning (HVAC) controls. York Industrial Controls, offering the industry's most comprehensive line of control systems for commercial refrigeration equipment, is dedicated to helping customers identify, correct and avoid energy waste. York Direct Digital Controls is dedicated to helping customers identify, correct and avoid energy waste within their lighting systems.

N/A