S1-02541336000 CNTRL,TEMP,145 OPEN,105 CLOSE,AUTO RESET

CNTRL,TEMP,145 OPEN,105 CLOSE,AUTO RESET

The Bosch CNTRL,TEMP is a control circuit board assembly for select Bosch electric dryers.

Thermostat Manifold has a T&P Valve 2 Port 145°F 105°F Lighted Push Button Control with Timer Reset. Electronic, solderless manifold designed for gas valves, Used with propane control and pilot assembly on gas water heater, logs and fireplace and pool table heaters.

Our Craftsman 1/2-Inch Drive Three Point Adjustable Torque Wrench with 11 Settings is a great tool for tightening nuts and bolts, while ensuring you have enough mechanical force to keep them in place. This torque wrench has a range of 1-20 ft.-lb., with 145 lb.-ft. set point and 105 lb.-ft. release point. It has a 0.6 percent rate of error within the 0-3 ft.-lb. range, and an accuracy rate of 0.1 percent from 3-20 ft.-lb., and features an automatic reset to ensure consistent and efficient use

This product is a readily available type of relays, which relays are used in almost all types of industry control, with high quality and stability. Its performance is stable and reliable. It is designed with an automatic resetting function. When the remote control re-transmission signal disappears, the relay will automatically shut off in a set time to prevent repeated automatic turning on and off. The parameter setting can be adjusted according to the needs of the user.

Temperature Control Unit, Indoor, Centrifugal Type Fan Control, 170 Degrees F to 145 Degrees F Temperature Range, 0 Degrees F to 105 Degrees F Cutout, 120/240 Vac Voltage

The Thermocouple is designed to control the temperature on various products. The thermocouple will control the product at the set point. If the product is too hot or too cold it will turn off or on accordingly. The thermocouple allows for direct control of the product set point. This sensor also includes a resettable, auto reset circuit breaker that will automatically reset after power is restored. It's ideal for use in water heaters, boilers, generators, chillers, furnaces and air handlers/conditioning systems.

This temperature control is used for dry basement conditions, heating or cooling small rooms, or controlling humidity. It features an automatic reset at room temperature. The control may be preset to turn on for a set period of time when the thermostat's temperature falls below the pre-set temperature, or when it reaches the pre-set temperature when cooling. The control may be set to turn off again when the temperature falls below the pre-set temperature, or when it reaches the pre-set temperature when heating. Three silver and gold contacts and a lamp in the lid signal operation and trouble conditions in both steady and flashing modes.