York 145309 S1-025-43267-000 1/2xFlg 24V Natural/LP Gas Vlv

VLV,GAS NATURAL/LP,1/2 X FLANGE,24 VAC

The YORK® S1-025-43267-000 is a GAS NATURAL/LP, 1/2"X FLANGE, 24 VAC, electric valve with the product type being VLV . The valves general purpose is Natural gas, LP gas, air or a combination of these using mixed gases. This product can also be used for refrigerants (that are not flammable).

This Series S1-S1-025-43267-000 valve, from York, is a 1/2 inch flange natural/LP gas valve used for process control and low pressure applications. This series comes in a plastic bonnet, 24 VAC power supply, with Allen screw type adjustment and a set pressure of 0 to 150 PSIG and 25° F to 350° F inlet temperature. The recovery time is 0 to 5 seconds. It can be used with other valve types in the product family like enclsoures or baseplates.

The York Electric 1/2" x Flange 24V Natural/LP Gas Valve is great for controlling gas flow to heating appliances for hot water and gas central heating systems.

The York YS145309 S1-025 VLV is listed for 1/2" x flange installation with gas or natural gas and 24VAC.

The York GS Series VLV Gas Valve is a direct replacement for any standard LP gas valve that uses a 1/2 in. male flare fitting. This gas valve can easily be converted to natural gas by connecting it to the appropriate gas line. With the simple push of a button, you can regulate and control the flow of gas through your system.

Upgrade your residential home or commercial building with the York 1/2" x 24 VAC gas solenoid valve. Developed for use as a low-pressure, pilot operated check valve and water control valve, this product comes factory assembled and tested. Ideal for use with gas fired water heaters, air conditioners, fireplaces and boilers.

The YQ1-025 series of 1/2" flare gas valves from York uses the standard 24VAC/DC pilot signal. The pilot signal is used by other manufacturer's valves as well. The pattern of the pilot flame is approximately 1/4 in x 2.5 in, but it may vary from one valve to another, due to the difference in manufacturing tolerances and burner adjustments.