York 145352 S1-026-12696-000 "24""dia 20deg 1/2"" CW 4bld Fan"

"24""dia 20deg 1/2"" CW 4bld Fan"

Four bladed 20 degree down draft blower with a diameter of 24 inch. Airflow is 10,400 CFM with a static pressure of 2.55" WG. The motor has a 220/440 volt split capacitor and a 2 speed 1075 RPM motor. Brand: York

This Ducted Utility Mug Fan was designed for year-round use. The unit is rated 1/10 hp (rolls to 1/4). This fan will not only work well in multi-vendor applications, but also serves as a speed control for other brand utility fans. The 1/2"" x 20 deg blades provide maximum air flow at lower RPM

The S1-20-2600614 is an economical centrifugal fan which can be used for both heating and cooling applications. It has a static pressure of 0.39"wc at 3500 rpm, Rotation of 20 degrees CCW, Blade Diameter of 24"" and RPM of 3500. This item is listed by the manufacturer as being shipped "Ships with fan installed."

DC Fan with 3 speed settings, 135 mm Diameter x 20 degree blade sweep, 4000 RPM (High Speed), (2000-3400 RPM (Low and Medium Speed) and running amps of 2.5/3/3.5 gives this fan balanced performance in residential and commercial HVAC applications.

Bring some comfort to your game room, garage, cabin, or den with this York fan. It has four blades that can pivot in any direction to offer optimal air circulation. It comes with a 1-year limited warranty on the motor and parts and features a protective grille and mounting brace and big button wall control.

Ideally suited for hospitals, laboratories, fitness centers, libraries, offices, retail outlets and almost anywhere else air movement is required. This unit features 3 speed controls (High/Medium/Low), 1"" Duct Collar (4.92""OD x 5.91""ID) and is suitable for "Recirculating" or "Non-Recirculating airflow", but not both simultaneously. It should be noted that the air velocity indicated by any of these impellers (108 fpm / 400 cfm / 0.63 m³/min.) should not be exceeded due to potential noise or damage

The York® S1 straight deep fat fryer with canopy control system has a 24"" diameter cooking basket and a 0.50 KW/120 V, 3-phase induction motor for quiet, reliable operation. The basket is constructed of carbon steel with a powder coat finish and includes a drain hole and basket separator to reduce splashing and improve oil circulation. The open design allows easy access and cleaning and the canopy-mounted control system provides convenient access to the thermostat knob.