S1-02814715000 SHEAVE,FIXED,SPLIT TAPER 2 GRV,2B5V42

SHEAVE,FIXED,SPLIT TAPER 2 GRV,2B5V42

Our S1-02814715000 SHEAVE,FIXED,SPLIT TAPER 2 GRV,2B5V42 is new and in stock.

The NSK SHEAVE,FIXED,SPLIT TAPER 2 GRV,2B5V42 is perfect for your linear motion requirements. The status of the product is new. The Shaft has a spline of 2 grv 2b5v42. The size of the shaft is 5/8" diameter by 1" long. The output type can be set to either -Keyed or Keyless.

Our sheave,fixed,split-taper 2 grv,2b5v42 is designed and manufactured in USA and has a 200 ton load capacity,the sheave and cup assembly and the mounting hardware (bolts) meet all applicable SAE specifications.

The 2B5V42-11 sheave is a fixed sheave with a splined split design and a precision bearing support that allows for use in multiple applications. With a large capacity and made from carbon steel, this sheave is used in applications where high loads are present.

Use this sheave with 2B5V42 lower block, 3/4" diameter rope and CBL807-3 sheave ball upper block on 5" I.D. shroud to control a winch line while recovering a vehicle from a ditch or other hole.

The 3M™ MT5AABEKCFB Splined Coupling has been specifically designed to help overcome the challenges of modern flexible-coupled drilling systems. 3M™ MT5AABEKCFB Split Taper 2 groove splined couplings have a rotating collar with a rotating locking pin for convenient operation and can be used to connect flex joints for hydraulic flex joint liquid level systems.

Split taper sheave with integral hub and collar. Designed for use in hoisting applications where extreme dynamic and static loads are encountered. Ideal for use in hoisting applications where extreme dynamic and static loads are encountered.