York 147530 S1-029-24468-000 GAS MANIFOLD 4 CELL

MANIFOLD,GAS,4 CELL

This York 147530 S1-029-24468-000 GAS MANIFOLD 4 CELL can be used with the following grill models:

This York 147530 GAS MANIFOLD 4 CELL is a stocked item and ready to be shipped to you today.

The York Gas Manifold 4 Cell is designed to be installed with one set of gas supply piping feeding either two units (e.g. furnace and water heater), or four units (e.g. furnace, water heater, hot water tank, and domestic hot water outlet). This unit is available with 2 or 4 branch legs, depending on your needs.

Maximize gas usage with the York 147530 S1-029-24468-000 Gas Manifold 4 Cell. This manifold...

The GAS MANIFOLD is designed to connect up to 4 gas burning appliances. It is suitable for use with various gas burners or gas cookers (including induction hobs) which must be connected with rigid pipes. The manifold is made of stainless steel, has four gas threads with shut-off valves and four brass NPT fittings; the end of the branch line, which is welded to the manifold, also has a torch tip for this purpose.

The Compact Manifold is built for York® gas heat pump systems. This device attaches via a 4-way valve to the outside of the heating/cooling unit and provides four outlets for delivery of gas to individual heating zones.

A gas manifold with four gas inlets in one compact unit. Four inlets in the base of the manifold provide flexible coverage, while preventing older style damaged taps from leaking down to outlets. It is suitable for gas cylinders with threads 20 x M20 x 1.5 mm (¾" BSPT) and 10 x M10 x 1 mm £º (?" BSPTE). A shut-off valve is incorporated at each gas inlet. Suitable for use with five standard low pressure wet/dry or wet/wet CO2 fire extinguishers that use BSPT threads.