York 147782 S1-031-09179-000 24v Relay Lock-In Board

BOARD,RELAY LOCK-IN,24V

Board Assembly, 24 Volt DC, NEMA 4X/7 Rated, 20 Amps. 137496 is an electric relay lock-in board used to control the power supply to relay assemblies located inside or outside of the relay enclosure. It can be used to activate external devices, such as motor starters or limit switches, or keep them de-energized.

The RELAY LOCK-IN board is a single pole, double throw magnetic lock-in relay. The relay is a single pole, double throw magnetic switch type, with a coil resistance of 10 ohms. It has maximum voltage of 24 volts DC and a continuous current rating of 3 amperes.

The York 147782 S1-031-09179-000 24V Relay Lock-In Board for use with York 13, 15, 28 Series Power Units Models may require the use of separate purchase part

The York 147782 S1-031-09179-000 24v Relay Lock-In Board is for use with the York 7 Wire Photocell Assembly (part number 417786) to create a photocell assembly that will turn off and on automatically.

Relay Lock-In Boards have a SPDT relay included to power the output signal. In addition, the board includes a manual over-ride "ON/OFF" switch allowing continuous operation of load devices. This board is intended for use with York Infinity Series lockers.

The relay lock-in board switch is a 2 pole, 24VAC/VDC switching device. The switch acts as a ON/OFF relay contact up to 1000/1200W. It works with standard contactor wiring and has a release push button. The board has a 10 AMP/125VAC slow blow fuse, a power on LED indicator and a NEMA 4X weatherproof housing.

This replacement Relay-Lock-In board is compatible with 1L2,1S5, 1S7, 2G0. 1N4, 1N5, 1N6, 1UJ, 1UJ6, 2K0. 2K6. 3CQ. 3GA0. 5A0.