S1-3500-378P SCS - Jumper Bar

SCS - Jumper Bar

The SCS-Jumper Bar securely connects 2 or more tow vehicles together. After you connect the vehicle chains, section off the front of one to serve as the steering vehicle. The Jumper Bar has two spring loaded hooks that hook into steel rings on both sides of the front vehicle. As you steer your vehicle, the Jumper Bar will tend to pivot up (about 30 degrees). This action places additional upward force on the tow-chain loop and provides better recovery if one vehicle should leave the roadway.       Download Brochure

The SCS Jumper Bar is a low-cost solution for applications where the SCS is not mounted in a location that would allow cable entry from above or behind. In this situation, you may mount the SCS directly to the host connector on the back of the rack. The drop cable can be routed through the mounting hole and connected to the SCS connector on system's front panel. The jumpers are seated into specially designed slots that hold them firmly against metal tabs on the back-panel of the TRCM. The design provides strain relief to the jumper cables, which aids in protecting their integrity during cabling

The SCS Jumper Bar is a compact, heavy duty, low profile safety cage designed to easily attach to industry standard four post automatic transfer bays. It is available in a variety of configurations to support a wide array of test and manufacturing equipment.

The Seagate STAA3500374P SCS Jumper Bar is a 2.5-inch SATA III internal drive that is capable of holding up to 500GB or more of data.

The Jumper Bar is used to connect a tow vehicle to a trailer with a ball. The Jumper Bar has a 33,000 lb GTW and 1,500 lb TW. It has 1" tubular steel legs with a 1-7/8" Schedule 80 pin. The Jumper bar measures 34 1/4" long by 2 7/8" wide by 3/16" thick. The pin measures 3 5/8" long by 3/4" wide.

The SCS power distribution units allow the user to manage and control up to six of their IoT devices by connecting each device with a power source and a Jumper. Once connected, all your IoT devices will be manageable and controllable from anywhere in the world using your smartphone and the Thing Control smartphone app (iOS or Android). All you'll need is Wi-Fi access, an internet connection, and an electric outlet to take control of your home! The S1-3500 likes to keep things simple. That's why it features only one switch (and let's face it - do you REALLY need two?) It

The AIJ bar allows easy access to the side chassis vent and the power supply (PSU) or expansion bay for rear connections. The bar can be used as a base for mounting top-of-the-line accessories such as the SCS...