YORK S1-7660-3591 LOWER LIMIT SWITCH LOWER LIMIT SWITCH

LOWER LIMIT SWITCH

The YORK S1-7660-3591 LOWER LIMIT SWITCH, 280 AMP is used with electrically driven heaters and is an easy way to monitor the water temperature in a pool. Before you purchase your S1-7660-3591 LOWER LIMIT SWITCH, 280 AMP. please do not forget to check our large range of other heating products, diagnostic equipment and spare parts for your pool at POOL PARTS CENTRE.

THE YORK S1-7660-3591 LOWER LIMIT SWITCH is designed for commercial AC motors. This is a 120VAC, 4-20mA output, Class 2 power supply mounted adjustable contact.

YORK S1-7660-3591 LOWER LIMIT SWITCH

A Y-type lower limit switch having a sliding contact for detecting power failure and a magnetic contact for detecting such contact with an iron plate.

The S1 Lower Limit Switch is a low voltage and current signaling and switching device that connects and disconnects the load from the source. It has a separate ground connection connection for added safety and ease of installation. The S1 Lower Limit Switch has an adjustable screw terminal block to adjust the closing angle.

These switches are used for controlling motors, limiting pumps, solenoid circuits, etc. These lower limit switches do not need any additional current rating other than what is stated on the rating plate. They should be used in applications where the output device senses the position of the moving member and moves it to its appropriate stop position when power is removed.

The York S-1 Series Locking Limit switch and provides a means for inductive load sensing and automatic stopping and starting of air compressor equipment. This is a fail safe 15 amp limit switch. It is designed to be used with systems that stop if the pressure in the tank goes below a pre - determined amount such as refrigeration or refrigerant recovery systems. The switch features normally open contacts on both ports and closures on both ports.