York 156066 S1-7680-3591 125-145F AUTO Limit Switch

125-145F AUTO Limit Switch

This is a 125-145F AUTO Limit Switch. This thermal type, one-piece limit switch is has a high accuracy rate of up to 3% at 125 F and 1% at 145 F. It's made from a combination of Nylon and Polycarbonate, for both durability and energy conservation. This limit is designed to last up to 120 million operations. The wire lead extends 4 inches out the top of the switch, allowing for easy installation.

The York 156066 S1-7680-3591 125-145F AUTO Limit Switch is an autotransformer type limit switch used for general purpose applications. It features a 175 psi contacts with 25 amp capability, enclosures are NEMA 1 rated, enclosures are shielded with shields that are die casted with stainless steel screen, available in 4 pole or 3 pole models, also available with or without an indexing device.

The YORTHA Sensing Products, York Division 156066 S1-7680-3591 125-145F AUTO 115V Limit Switch contains a microswitch that will operate at 125-145 F with an actuator of 3/8" max. This product is designed for domestic and commercial use. The gauge of this product is 0.63"H x 1.5"W x .625"D and it weighs approximately 1 lbs.

The York 156066 is a 125-145F auto limit switch that is used for controlling burner or heater operation. It has dual sensors that function during cooling mode and the control circuit is mounted on the terminal block face. The design of this range control automatically turns off power to the heater if excessive temperature conditions are detected.

A 15 amp, 115/230 VAC, Normally Open Auto Limit Switch that provides a variety of output options. One pushbutton and one indicator LED provide 1-of-3 output function and status indication. Light emitting diode (LED) indicator glows green when the pushbutton is pressed. This product comes with a 7-year limited warranty.

Be confident in your limit switch selection with the industry's best .002" per revolution over travel. A rugged impact-resistant mechanism, large pushbutton switches and ergonomic actuators protect electronic components from damage due to shock and vibration. Each switch features a 15A at 250VAC rating.

For durability, reliability and performance use an original YORK limit switch. Our relays are organized into functional groups that correspond to a particular pump or motor application. Specifications detailing the various characteristics of a limit switch are available under the Documentation tab. If you have a question about a particular application, please do not hesitate to contact us!