YORK S1-HUSOLVLV12-24V VLV,SOL,24V FOR HU12,HU17,& HU18

VLV,SOL,24V FOR HU12,HU17,& HU18

The YORK S1-HUSOLVLV12-24V VLV,SOL,24V FOR HU12,HU17,& HU18 is a high quality product from York.

The YORK S1-HUSOLVLV12-24V VLV,SOL,24V FOR HU12,HU17,& HU18 is a 220/240 volt input voltage VLV compatible with the first and seventh generation of HVAC models. It can also be used with the current version without compromising performance or function. It targets energy savings and excellent air quality. The vlv for 12v York units acts as a coil only 24 volt unit.

The YORK S1-HUSOLVLV12-24V Variable Speed Drive for HU12, HU17, & HU18 is designed to fit into a 2x3", 3" or 4" electrical box. The S1 Drive is available with single phase standard molex connector or the hard wired large 6 pin connector for use with a variable voltage cord.

The YORK S1-HUSOLVLV12-24V controller is a power isolation box intended for use with 24 V systems only. It can be used in conjunction with the HU12, HU17, and HU18 system components. The S1-HUSOLVLV12-24V Component can be also used as a stand alone isolation box.

This magnetic Low Voltage Control (LV control) is designed to replace the 24V wall mounted controller for use with HU12 heater/ventilator units, HU17 cool only fan coil units and HU18 unit heaters. This Current Relay Control ensures correct compressor start up when power is restored after a power failure. It may also be used on single phase systems to extend the life of the compressor in two stage cooling equipment.

The HU-series heat exchangers are compact, front-mounted heating and cooling units for the ventilation of commercial and industrial buildings. The advantage of central unit locations is that they can deliver the air from a heated room to several rooms at once or cool it down with a single fan while economizing on energy costs. This VLV.SOL 24V Unit has the following characteristics:

The S1 valves are designed for use with HU12,HU17 and HU18 models. They have a compact size and easy installation making them a great choice for replacement applications or a custom installation .