YORK S1-M2-415LF LIQ FILL R410A PRESS GAUGE-RED (M5) LIQ FILL R410A PRESS GAUGE

LIQ FILL R410A PRESS GAUGE-RED (M5)

This LIQ FILL R410A PRESS GAUGE-RED (M5) is designed to be easy to use. Our LIQ FILL R410A PRESS GAUGE-RED (M5) suits the everyday needs of the individual consumer trying to perfect their craft.

LIQ FILL R410A PRESS GAUGE-RED (M5)

The LIQ FILL R410A PRESS GAUGE-RED (M5) from YORK is a press gauge which uses a tubing stripper to pressurize closed systems. This gauge provides the user with a low-cost, visual way to check for overcharge and incorrect install procedures

The LIQ FILL R410A press gauge measures the pressure differential between a liquid charged system and a charged system. It has a range of 0-1000 psi with a resolution of 0.1 psi and is built to ASME B40.21.3-2010.

This is a liquid fill -only gauge for use with R410A refrigerants not exceeding C.O.P. 0.60 and rated at or below 485Mpa.

The SHORT-TUBE PROPANE PRESSURE GAUGE is used to fill liquid refrigerants into the evaporator circuit. The gauge is made of aluminum alloy, baked enamel red color scale easy to read. This gauge has the features of small volume, good sealing performance, low inertia, high accuracy. The gauge uses long tube, which means it is easier to be bent or broken during transportation.

It's compact, rugged, easy-to-use design allows for quick setup and accurate pressure testing on M5 refrigeration systems. Features include: Test hose adapter with 2 adapters on hose body, brass male inlet on gauge offers better accuracy than plastic alternatives. the "On-Off" valve on gauge offers added safety when not in use. A 5 psi scale opposite the 0 psi scale for gauging liquefied gases.