SCHLAGE 65304 Electronics 653-04 Keyswitch, SPDT Maintained Single Direction, Satin Chrome Finish

LOC 653-04

SCHLAGE 653-04 Electronic Keyless Entry Security Kit, Satin Nickel

The 653-04 Satin Chrome Key Switch is available as a single pole, double throw or three pole switch. This is a Miniature, 0.75", long switching device with 22/24 AWG Form "C" leads. Features include a 3/8" Terminal Block and weather resistant construction.

With its sleek, sophisticated exterior and pleasing satin chrome finish, the Electronics 653-04 Satin Chrome Single Direction Switch is both a gorgeous addition to your home or office decor and an ideal security control. This single-direction key switch features a clean electronic z-Wave design that lets you control your lights or appliances from virtually anywhere, in any Z-Wave enabled network.

The 653-04 keyswitch is an intermediate keyway switch ideal for replacing traditional light switches or for new house wiring. It has a single position ON, double throw OFF and is maintained by the contacts in the actuator, which means it requires no external switch support. Satin chrome finish.

The Electronics 653-04 Keypad from Schlage provides increased access control security, and can be interchanged with standard cover plates in less than five minutes. This keypad is ideal for the electronics such as an amplifier, microwave, or intercom. It features Dual function on makes it easy to control what you want at different times of the day. The Electronics 653-04 from Schlage is a perfect solution for your home electronics.

The Schlage 653-04 satin chrome finish electronic switch features a single direction SPDT maintained position key switch with spade terminals and is suitable for home or office security system applications. The SPDT key switch turns your alarm systems components on when you close the door, and shuts the system down when you open it.

For use with electronic locks. 6300/6500 Series of Schlage Electronic and Colonial electronic locks, 4 to 5-1/4 inches (102–135mm) backset, Horizontal or vertical mount, 1-1/2 inches (38mm) wide x 1 inch (25mm) high