SACRAMENTO INSIDE TRIM 716 LH F59-SAC-71
Works with Schlage's Bi-Directional Digital Lock ILUM 2.0 to allow for single handed entry, you can unlock your door without the use of a traditional key.
The Schlage WS-200 is an electronically controlled, keyless entry solution for residential and light commercial applications. It includes both a mechanical bell/strobe and an electronic bell/strobe. The system can be activated by local access or remotely from the Master Control Unit (MCU).
Banner Security Schlage WS-200 electronic security wave switch Ilum 2.0 FM is designed to control the lighting output connected to a load up to 200 watts of single phase or 100 watts of three phase electricity. This product is designed to delay the lighting load from being activated for up to 60 seconds when it receives a security signal from a keypad, remote, or other type of controller. The delay allows for sufficient time for a user to leave an area without activating the load and then return without causing the load to be turned off again by an Auto Reset function. Banner Security Schlage WS-200 electronic security wave switch Ilum 2.
Keep your home safe, secure and energy efficient with the Schlage Wave Switch Illumination 2.0. This stylish device works with existing lighting to turn on lights when motion is detected and off after 30 seconds of no movement. Easily set up this security switch in minutes and control it right from your smartphone or tablet.
Schlage WS-200 ELECTRONIC SECURITY WAVE SWITCH ILUM 2.
The Schlage Electronic Security Wave Switch is a self contained electronic switch that is less than one inch thick. The compact design makes for an excellent solution for cabinet doors, drawers and much more. The WS200 can be used as a stand alone electronic door switch or as part of a larger electronic system.
Specification Sheet
Schlage’s Wave Switch, model WS-200, is a high quality product that allows you to control an electronic device from up to 200 feet away. The product features a switch, which operates by connecting the two wires to different poles on the switch.
This switch is typically installed in a garage, and turns on lights or other devices when motion is detected.