SCHLAGE SD10JSTP8630 Strap Mount 96 Inch Sliding Barn Door Track and Fitting Set for Interior Use

SD10 J STRAP 630 8 FT

SD10 J STRAP 630 8 FT This innovative design includes a 96 mm metal ball that hangs together with a 4 1/2 "curved slot and a circular bracket, end-to-end. The metal ball in the middle of the door requires an additional fitting to connect to the metal ball in the track. Both metal balls must be screwed into place firmly in order for this product to function properly. Note: If one side of a barn door is fastened, the other side should be unable to slide open on its own.

Strap Mount: Strap mounts are designed to hold doors up to 150 pounds. The 4-point mounting system has a top strap that goes over the door, two side straps that attach to the sides of the door frame and one bottom strap that attaches to the floor or threshold of the door opening. NOTE: SD10 Jstrap 630 can also be used as an overhead mounting system for barn style doors using optional overhead track and hanger system.

Schlage SD10JSTP8630 Strap Mount 96 Inch Sliding Barn Door Track and Fitting Set for Interior Use. We have a wide selection of strap door track, aluminum door track, custom sliding doors and barn door hardware Our fast and simple shipping will get you what you need when you need it.

The SD10 Strap Track System allows you to create highly customized sliding barn door applications. The lightweight, flexible track easily secures to the wall, and installs over standard 2x4s to accommodate any length door up to 6 ft., 8 in. This package includes a 96-in. long strap and one bracket/connector. The 34-in wide strap is available in three lengths: 78-in., 96-in., or 132-in. The tracks are 40 in. long and available, or can be cut for custom installations.

Your sliding barn door will look beautiful with this 6 track set and strap hardware. Strap Mount is the most secure of all the mounting options that we offer for our Sliding Barn Doors. The track incorporates a textured J channel surface, which secures the straps to the track. The recommended belt for this track is the 8 ft. Matching Straight Slider (Part NSD10). This strap mount installation comes with 6 stainless steel tracks and hardware necessary to mount a single door (6 ft.) using two top and bottom tracks. MADE IN THE USA!

Introducing the Schlage SD10 - J Series, a line of high profile, commercial grade butt hinges that are designed for heavy duty applications needed in the food industry. From raw food storage, to serving, baking and prep, the versatility of this hinge is unmatched. The deep box allows for complete vertical adjustment allowing you to alter the door height by simply loosening the screws and then adjusting vertically with no need for additional hardware or fasteners.

A complete strap track system to be used with the T strap track, door kits, and hardware. Industrial grade powder coated steel for a long life. Manufacturer's limited lifetime warranty.