SCHNEIDER ELECTRIC
SCHNEIDER ELECTRIC 31041-400-51 -Square D 240V. COIL
240V. COIL
My Account
If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New Account208V Sz00/0/1 Magnetic Coil
SCHNEIDER ELECTRIC 31041-400-48 208V Magnetic Coil is a commercial grade product used in the protection of circuits up to 1600 AMP. This item has a voltage rating of 208V, as well as voltage of 00, 0 and 1.
This 208V, 1.0 HP, 3-ph, NEMA 1 coil operates at 40/50 Hz with 90 amps. It has a maximum continuous duty current of 36 amps at a frequency of 50 Hz to 60 Hz and 70 amps at a frequency of 40 Hz to 49 Hz. This Schneider Electric General Purpose Magnetic Coil was designed for use in 208V Single Phase applications with on/off control mode and is rated for 50% duty cycle at 240 cycles per minute. The 31041-400 series magnetic coils offer all copper windings with high quality insulation and are typically used in a variety of general purpose residential and
The Square D® Sz00 Series Trip Circuit Switches are rated for 600V/300V, 10A, AC only, and feature a 4700 amp breaking capacity in conjunction with an interruption rate of 3.5x10-3. These switches come with a 0.63 pole throw that provides more switching power than a 0.5 pole throw switch. Designed for U.L. 1st grade flush mounting applications, these high quality switches incorporate an easy-to-make quick contact that meets American Wire Gauge (AWG) specifications for use as service entrance equipment or to meet the requirements of NEC Article 340
The Square D by Schneider Electric, Magnetic Coil, Voltage 208VAC, Isolator C-Size, Interrupting Capacity 40KAIC, Features Instantaneous Trip, Interrupter OD 11/2 Inches, Overall Height 61/0 Inches, Overall Width 101/4 Inches, Overall Depth 31/0 Inches.
A magnetic coil, siemens -Square D part
Continuous Duty - Air Over, Magnetic Coil
The 31041-400-48 Square D 208V Automatic Transfer Switch provides the power source when utility power fails, switching to generator power without operator action. It transfers automatically from utility source to generator source upon loss of utility voltage.