"6input
The Schneider Electric™ pneumodular® multi-input high and low selector relay combines the functions of a switch, selector switch and reversing contactor in one compact unit
This relay can be used as a multiplexer to control up to 6 outputs from one low current control signal
They are also used when different outputs are required on the same switch
The pneumodular® range is available with 6 or 8 inputs
This product has been tested and validated on systems from various manufacturers, including the following: COMAT, ETC, JUNG, LAMPTEC, LEDVANCE and Schneider Electric
Schneider Electric Pneumodular® Multi-Input Selector Relays are used when more than two inputs have to be selected by a single output
The relay is an alternative to the classic pneumatic input where the contacts are not mechanically separated, but they stay independent because no vacuum channel is required
The relay complies with IEC/EN 60947-5-2 and UL 508 requirements, making it particularly suitable for applications where these standards apply
0001 RLY THERMOSTAT DOOR SENSOR, 0102 RLY THERMOSTAT DOOR SENSOR, 0201 RLY THERMOSTAT WATER TEMP, 0202 RLY THERMOSTAT WATER TEMP, 0301 RLY COOLING-FAN-TEMPERATURE, 0321 RLY CHASSIS HEATER SUPPLY AIR
Schneider Electric 2373-501 - Pneumatic 6 Input Relay
The pneumodular® Series incorporates six selectors in one unit and can be mounted as a normally open, normally closed, or changeover contact
The relay has a UL rating of 10,000W for 30 minutes at 600VAC
The Schneider Electric 2373-501 Pneumodular® Multi-Input High and Low Selector Relay is a solid state relay that responds to four different logic levels, creating a 4×2 matrix contact configuration
The Schneider Electric 2373-501 2373501 2373 Series Pneumodular® Multi-Input High and Low Selector Relay offers a compact design with a high level of functional integration for easy installation
The relay is used in applications requiring high isolation resistance, such as electronic instrumentation, microprocessor controls, DC power supplies and digital computers
The Pneumodular® Series 2373-500 Series is a vacuum-sealed diode selector relay with electrically isolated contacts
Pneumodular® relays are one-piece units which provide protection against operation of adjacent circuits
The SCHNEIDER ELECTRIC 2373-501 2373501 2373 Series Pneumodular® Multi-Input High and Low Selector Relay is a relay that has six electrical inputs
The Pneumodular® Multi-Input Relay offers space and cost savings without compromising performance in applications with a large number of inputs
A multi-length connector plug is provided with each relay to allow multiple relays to be mounted together in an electrical enclosure
This relay can be used for switching high current (up to 60A) and high voltage (480VAC)
The Pneumodular® Multi-Input High and Low Selector Relay is a 6 input contact module, with an integrated power contactor
Free Shipping
In stock
