SCHNEIDER ELECTRIC MK-6801 (Barber Colman) "3-8# VALVE ACTUATOR

"3-8# VALVE ACTUATOR

These relays can be used with a wide range of loads such as motors, transformers, heaters and resistive loads up to 2A with the Square D LRD-LH family and 5A for the Square D LRD-LHA family

5A overload relay that is rated for 250VAC

It helps prevent damage to motors and overloads by linking the overload relay contacts immediately when it detects a motor has started

5A overload relay designed to protect motors from thermal and mechanical overloads as well as from low-voltage conditions

Schneider Electric LRD07 Square D 1

It also provides a means of indicating the occurrence of these faults to the connected control circuit, which must provide an additional contact that can be connected to the NO (normally open) terminal of the relay

This relay is perfect for critical applications where it is important to minimize energy loss and protect connected equipment and systems

6/2

Square D Relay - 1

The Schneider Electric LRD07 is a 1

They are available in a variety of sizes to suit the demands of different applications

Square D Relay Model LRD07

5A Overload Relay, 120-277VAC, 50/60Hz, 10 pole

5A Overload Relay, 240VAC

5A Overload Relay can detect overloads on single phase circuits and interrupt the current flow while also opening the circuit breaker

Square D Overload Relays are designed for dry type, overload protection of motors, drives, transformers and other electrical equipment

Square D Relay Model LRD07 range of relays are designed to protect sensitive electronic equipment against overload and short circuit conditions

The relays also have features such as automatic current limiting, a power factor correction capability and long time delay protection

The relay remains energized until the motor stops running or until the load current returns to normal level

1

SOLID STATE INTERLOCKING RELAY, STANDARD APPLICATION, 1NO+1NC ACTUATOR TYPE, PUSH TO MAKE/PULL TO BREAK

The Schneider Electric LRD07 Square D 1

For 1 Pole, 2W, 120/240VAC, 1

They are suitable for use in the most adverse conditions (dusty, moist or hot environments)

Overload protection is designed to detect excessive current caused by a motor starting or by a short circuit

The LRD07 is a square D 1

It includes an automatic reset function and has a mounting bracket, terminal screws and wire nuts included in the packaging