ERIE 30-140-A Schneider Electric () "24V MOTOR FOR ""R"" VALVES "

"24V MOTOR FOR ""R"" VALVES "

The Schneider Electric Range ""24V MOTOR FOR ""R"" VALVES " / Catalog No. 30-140-A is designed with a three-position control switch that offers complete burner performance and overheat protection. It features identical power output with 4 to 80 percent output adjustability for a wide range of applications. The unit requires constant voltage to operate and motor current varies according to the heating demand of the burner or external connections such as rising or falling temperature valves. The ""24V MOTOR FOR ""R"" VALVES " has a built-in 20 amp circuit breaker for an added safety element and a

The new ERIE 30-140-A Schneider Electric () 24V MOTOR FOR "R" VALVES is designed to run a ""R"" Valve when it is used as an actuator for both dry and wet applications. The installed sealed DC motor features removable penstock shaft, the ability to withstand high temperature of liquid, and stainless steel shaft to resist corrosion. This motor comes with one set of 3/4 x 4 blade, metal encased, gear reducer regulator.

The Erie 30-140-A is a 24V, 1PH, 140/130 amp motor for use with an ""R"" valve. This following features are included in the design of the Erie 30-140-A motor: Operating current is 30V (at 100% load) and 9.9 Amps; 50 Hz operating frequency ; Maximum operating speed is 5500 RPM; Maximum overload protection at 150%

Erie 30-140-A Schneider Electric Motor for "R" Valves

The Schneider Electric Erie 30-140-A is a rated motor for actuators rated 0.25 to 0.75 hp. The motor is slow speed, balanced and insulated for long service life at industrial applications. The Erie 30-140-A is compatible with new and existing "R" valves. This 24V motor operates single and double seated "R" valves and has an adjustable mounting plate for the actuator.

These motors are designed for use with ""R"" valves to be used on System 2000 and System 3000 series water heaters. The sealed, ERIE

Fits the "R" type valves.