ERIE AG13A060 24V ON/OFF 2 POSITION SPRING RETURN FOR 2 & 3 WAY

24V ON/OFF 2 POSITION SPRING RETURN FOR 2 & 3 WAY

The 24 volt ON/OFF 2 position spring return actuator; is used to control and switch 2 & 3 way solenoids. Ideal for use for vehicle door locks, dome lights, trunk lid closures and many other applications. The actuator has an operating range of .5 amperes @ 24 volts, a 6 inch wire lead with a Female spade connector on each end, it draws .24 amps in the OFF position.

This heavy duty, ON/OFF 2 position spring return valve works with 2 & 3 way control valves. It's electromechanical with 24V power source to operate the solenoid (external voltage or 24V battery).

The 24V AG13A060 is an on/off, spring return, 2 position jumper wire; green/yellow; 24V. It is used in multi-way and 3 way automotive lighting circuits for reverse light/directional signals.

The 2 & 3 position spring return switch is designed to control two or three devices, and will save you time from having to manually turn the device on or off from the device itself.

The AG13A060 2 & 3 way ac/dc valve has two 2-way on/off positions and one 3-way on/off positions. Upon DC 12V power applied or returned to 24V, the flow will stop at both on/off position A & B, and upon DC 12V power applied or returned to 24V, the flow will stop at all three on/off positions.

The Ag 13a Eerie line is a spring return configuration switch. It is designed with an ac polarity switching capability. The Ag 13a will only work on ac and dc applications, not dc to dc applications. The Ag 13a is a single pole, double throw configuration of 24vdc applications.

The AG13A non-latching spring return actuator is an ideal choice for vented enclosure and door applications, such as ventilated refrigerators, range hoods, freezers, and other applications requiring spring-loaded operation.