ERIE AH13A020 Schneider Electric () 24V N/C S/R HCO ACTUATOR

24V HIGH CLOSE OFF NC ACTUATOR W/NO

Schneider Electric () 24V N/C S/R HCO ACTUATOR W/NO WHEEL 24V HIGH CLOSE OFF NC ACTUATOR W/NO WHEEL

The Schneider Electric AH13A020 24V High Close Off NC Actuator w/NO cable (10-ft) is for use with the HCO. This cable is not compatible with the Enviromax.

The N/C high close off (HCO) actuator controls airflow to a constant pressure fan. It is used in the ductwork systems of high pressure N/C fans, and is a two-way 24 VAC single pole (SP) model.

The HCO Series is a standard 24VDC high close off (HCO) actuator. It has a M8 threaded shaft and operates on a 0-10V;0-20mA current loop signal. This allows the motor to be activated by application of either current or voltage. The HCO can be used to control both AC and DC motors.

The 24V HCO Actuator is a pilot operated single-phase normally closed actuator, with built-in neutral disconnect protection. It features an emergency stop function that allows remote activation of the safety mechanism during operation. It is suitable for applications requiring negative actuation and can be integrated into various human machine interfaces (HMI).

A 24V N/C, S/R HCO AC/TU MOTOR START LIMIT SWITCH ACTUATOR.

With easy access to the 3/4 HP high-output permanent magnet motor, there is no need to remove the air duct to change or service the AH13A020 Schneider Electric () 24V N/C S/R HCO ACTUATOR. The overload protection system is equipped in the end casting of the motor and includes a manual reset trip and thermal protection. The air duct is made from aluminum for increased durability. This fixed-speed, gearmotor is designed to operate with a 230 VAC, single-phase voltage supply. The reason for this change? So many of the product descriptions are written with three