ERIE AH23B020 Schneider Electric () 120V N/O HCO S/R ACTUATOR

120V TWO POSITION SPRING RETURN N.O

The TWO POSITION SPRING RETURN N.O. Model AH23-B020 is designed for use with Double Throw, Single Pole HARD TURN OFF type switches and ERIE # 30204, 30208, 30221 Instantaneous Contactors.

The NWX05T120 NWX0.5 HCO S/R Actuator is a 120V two-position spring return, normally open (N.O.) contactor that can be used as part of a safety interlock circuit on a CIRCUIT DEVICE to indicate the presence of a fault condition. The NWX0.5 ...

ERIE AUTOMATION AH23B020 A2Z ACTUATOR, 120VAC N.O., 2 POSITION, SPRING RETURN, N.C. THERMOSTAT PROVISIONAL PARTICULARS

The ERIE 120V two position spring return actuator is a spring return, mechanically held control switch designed to control a variety of functions. It features a two position on/off with positive stop, roller lever and isolated ground (no neutral). It is designed to control the application of electrical current for air conditioning, heating, and other air handling equipment and controls.

A2L032 The ERIE A Series Standard Limit Switch is a two position switch which has two normally open (N.O.) contacts for load control and is used to convert signals to a format suitable for control by an electronic controller. The ERIE standard limits switch is utilized in applications that have non-time critical timed cycles or continuous on/off cycles. It provides basic cycle control without the need for sophisticated computer programming.

Spring Return Actuator, Right Hand Motor Mount.

The AH Series coils are pneumatic actuators designed for use on common fire alarm panels or other automation devices that use N.O. and N.C. single-throw latching solenoid valves. These coils are available in various stroke lengths, with body styles designed to meet both U.S. (1 in.) and European (32 mm) mounting requirements and configurations rated to 350 VAC or 500 VAC at 3 A or 6 A resistive loads, 24 VDC at 2 A resistive load and 36 VDC at 1A resistive load and an environmental rating of NEMA 4X/