Honeywell M847D-ZONE 24v S/R Open AirZoningDampAct
TRUEZONE REPLACEMENT ACTUATOR - ZON The Universal Zone Actuator from Honeywell is used in conjunction with the 875 series of open air zoning dampers and the 831 damper actuator designed for most...
My Account
If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New Account24vN/C 3Wire S/R w/TimeOut
The Schneider Electric () 24vN/C 3Wire S/R w/TimeOut Timer is a programmable 24VAC, NEMA configuration, 1 or 3 wires series with a maximum current of 30A. It includes a side hubbell opening, an aluminum cover knob for extra durability when locked, and features an replaceable 15 min. Timer.
The AT13A00T from Schneider Electric is a 24vN/C 3 Wire S/R w/TimeOut, ideal for use when additional load shedding capabilities are required.
The Schneider Electric 24V N and C 3 Wire Switch with Production Time-Out, (PTOO) offers all the standard features of the product line. This switch is designed for use in control circuits with 24VDC operating at 100 watts or less (0.5 A), and includes overload protection.
The ERIE AT13A00T 24vN/C 3wire smoke alarm is suitable for residential and industrial applications. It is designed to test both the power to the smoke detector and the battery at a pre-programmed time interval, identified by the time delay and warning.
The E-AT13A00T is an indoor plug-in appliance timer designed for home safety. It uses three wires and features a single pole double throw timer with time out control. The E-AT13A00T allows you to set the power on time (ON) with the 'On' time selector, which can be continuously adjusted, from no time period at all to 99 minutes 59 seconds (OFF - ON) and then select the power off time period, from one minute to 12 hours in one minute increments.
The Schneider Electric AT13A00T has built-in safety features including a manual transfer switch (MTS), reset buttons, and blackouts available for use. It is a 13.8V/24V #30 Amps/100% Duty Cycle with Timeout jump start part number that is designed for user convenience.
This item is the time-out protective relay, which mounts between the contactor and ground fault protection device.