SCHNEIDER ELECTRIC 8910DPA43V09 -Square D 208-240V 40AMP 3POLE CONTACTOR

208-240V 40AMP 3POLE CONTACTOR

208-240V 40AMP 3POLE CONTACTOR Electronic AC contactors are energy efficient and reliable for integrating lighting, fans and motors. These AC contactors are available in 1 to 5 poles and 3 to 4 configurations. Wide selection of special features, including timers, modulating drives, soft starter capability, resettable breakers, delayed switching and quadrature outputs with 4 line transmitters extend the potential applications of these products in your home and commercial needs.

Schneider Electric Model: 8910DPA43V09. 208-240V 40AMP 3POLE CONTACTOR, NEW IN BOX. Description: Contactor Type: Hf Ckt A (Pole), ATC Rating 200A@230VAC 0.8A@240VAC, Cable Size 1/0AWG, Current Rating 40A on both poles (20A per pole) Poles 2, 143T frame(s), Ampacity AC200A/1min

This is a Square D by Schneider Electric 40 Amp Contactor 3 Pole 90-220V 50/60Hz 208-240V at 208-240V // **This contactor is designed for use in industrial and commercial applications, where long life and high reliability are required. Phase: 1, Voltage: 440/480 V, Amperage: 40, Poles: 3. Pole Arrangement: Single Throw, Number of Wires: 2, Voltage Rating: 440/480 V. Ratings

Square D Contactor 40 Amp 208-240 Volt 3 Pole, NEMA 1 Enclosure, Ambient Air Resistant

This Square D® 40A, 208/240VAC, 3 Pole Contactor is designed to switch appliances in industrial or commercial applications. It features a normally closed contact arrangement with coil ratings up to 600VAC. The main contacts are AC rated for voltages up to 600VAC.

220 volt, 40 amp, single phase, 3-wire hot, and neutral contacts in a NEMA 1 Enclosure with cast aluminum cover. Positive closing contacts rated at 8 Amps @ 120V AC. A common single pole contactor used for air conditioners and other heating and cooling equipment.

This Schneider Electric square D contactor is designed for control of 3 phase natural/important or natural/secondary loads. This useful contactor has an AIC rating of 40 amps, voltage rating of 208 and 240 volts, and a current capacity of 40 amps.