3POLE 50AMP 24V CONTACTOR
Square D by Schneider Electric 8910DPA53V14 – Square D 3POLE 50AMP 24V CONTACTOR
The Schneider Electric 8910DPA53V14 -Square D 3POLE 50AMP 24V CONTACTOR is a type of switch that can be used to complete or break an electrical circuit on command
Schneider Electric Modicon Quantum
It comes in a DIN-rail mountable housing, with a mounting bracket that mounts to the rail using screws
The mechanism of switching may involve moving contacts or non-contacting means such as a photoelectric device
It is predominantly used in electric circuit protection, control and power distribution systems
It has a maximum continuous rating of 50 Amps at 240/415 VAC and a maximum trip rating of 75 Amps at 240 VAC or 415 VAC
The contactor is designed for use in applications such as powering motors, solenoids and other non-latching loads
You will have an instant access to the information about the product Schneider Electric 8910DPA53V14 -Square D 3POLE 50AMP 24V CONTACTOR, Manufacture product description or features, price information and also the VWR catalog
The terminal block is detachable and can be mounted on the right or left hand side of the unit
SCHNEIDER ELECTRIC 8910DPA53V14 -Square D 3POLE 50AMP 24V CONTACTOR
The Schneider Electric 8910DPA53V14 - Square D 3POLE 50AMP 24V CONTACTOR, is a contactor for use on non-reversing applications for low voltage control, overload protection, and shutdown
The contactor has a maximum current rating of 50 Amps at 120/240 VAC and is designed to work with square D load centers or other devices that are compatible with this load center
This contactor has been designed for use in 3-phase systems to control heavy current loads
This contactor is part of the Schneider Electric 8910 Series
Used in Schneider Electric PLCs
The Square D 3-Phase, 50 Amp Contactor is a 24 V DC coil that requires a 24 V DC control signal to open the contacts
The Schneider Electric 8910DPA53V14 is a 3-pole 50Amp, 24VDC Contactor
The Schneider Electric 8910DPA53V14 -Square D 3POLE 50AMP 24V CONTACTOR is used for float service applications requiring a 25-cycle contactor
System solutions for distributed power applications