SCHNEIDER ELECTRIC 9013FHG2J27X Square D by Air-Compressor Pressure Switch, 100 psi Set Off, 20 psi Fixed Differential, 1/4" NPSF Internal, 2-Way Release Valve

20/100# DPST # Sw

The 9013FHG2J27X pressure switch is a fully enclosed, oil-filled device that protects air, gas, or other non-corrosive media systems from excessive pressure and release. This unit can be installed upside down to accommodate mounting requirements. The pressure switch has two switching modes to choose from: 20/100# DPST and 20/100# SPDT. A pressure relief open toe is offered as another option.

The 15/20# 1/4" Stationary pressure switch, with two 20# and two 100# set points, has a SPST (wire closed) Normally-Closed automatic reset that is applied or removed from service.

The Schneider Electric 9013FHG2J27X Square D by Air-Compressor Pressure Switch, 100 psi Set Off, 20 psi Fixed Differential, 1/4" NPSF Internal, 2-Way Release Valve is a simple two position pressure switch that features 1/4" quick connect ports for high and low pressure applications. The switch also has a two way release valve to let air or gas out after it reaches the set pressure. This unit is great for monitoring your hobbies, tools and other tasks that require you to retain a certain amount of pressure.

If you are looking for a Square D by Air-Compressor Pressure Switch, 100 psi Set Off, 20 psi Fixed Differential, 1/4" NPSF Internal, 2-Way Release Valve SCHNEIDER ELECTRIC 9013FHG2J27X We can provide a large variety of appliance items.

The Schneider Electric 9013FHG2J27X Square D pressure switch is used for air-compressor applications. This pressure switch includes a two-way trip release valve. It features a maximum inlet pressure of 100 psi and minimum differential of 20 psi.

The main duty is to protect against overpressure and for relief of equipment in continuous service at 100 psi with a 20 psi differential. Maximum working pressure 125 psi.

A rugged manual switch made of solid brass and stainless steel for durability, it is actuatable by hand yet has a spring steel handle over-travel stop that eliminates over-extension of the handle when actuating. It features air pressure settings from zero to 100 psi with a set-off of 100 psi, and an adjustable differential pressure range between 20 and 100 psi from the fail-safe setting.