SCHNEIDER ELECTRIC 9013FSG2J20M4 Square D by Air-Pump Pressure Switch, NEMA 1, 20-40 psi Pressure Setting, 20-65 psi Cut-Out, 15-30 psi Adjustable Differential, Low-Pressure Cut-Off

10/65# DPST # Sw

The Schneider Electric 9013FSG2J20M4 Square D by Air-Pump Pressure Switch is used in applications where the pressure switch senses the low or high pressure and controls secondary devices such as pumps, solenoids, lights or fans. This pressure switch can operate dry contact outputs normally open, normally closed, and changeover (dual element). It operates at 10/65# DPST # Sw, 20 - 40 psi Pressure Setting, 20 - 65 psi Cut-Out, 15 - 30 psi Adjustable Differential, Low-Pressure Cut-Off.

The Square D by Schneider Electric 9013FSG2J20M4 10/65# DPST # Sw is designed for use in environments that need damp, humid, or corrosive conditions. The switch features an adjustable differential of 15 to 30 psi. This model has been designed with a low pressure cut-off of 30 psi, resistances varying from 20 to 40 psi, and is rated for operation at 100% duty cycle. The mounting type on this unit is a DIN rail mountable panel board. This Square D by Schneider Electric can handle liquid levels between 10 and 65 pounds per square inch. It operates

The 9013FSG2J20M4 Square D Bypass Air-Pump Pressure Switch (T11A3203K) is a single phase normally closed pressure switch used for controlling air pumps. Features of this device include: a cutout setting ranging from 20 to 60 psi and a differential setting ranging from 15 to 30 psi. This pressure switch comes with a manual override, contact ratings of 10/65# and an AC voltage rating of 120/208/230/240 VAC. It also comes in industrial gray colored enclosure, and requires compressed air at 40 psi for operation.

Miniature, rugged, dry-contacts pressure switches have limitless applications in process control. They are used to control compressed air, steam, gases, liquids and vacuum systems. Ranging from 10 psi to 65 psi in pressure-setting range, the outside diameters of these switches are furnished from 1/4" to 1". Pressure switch contacts come in 5A and 10A breaking capacity with 3-Pole/2-Wire and 4-Pole/3-Wire configurations.

The Square D by Schneider Electric 9013FSG2J20M4 Air-Pump Pressure Switch is a general purpose, variable duty, diaphragm-actuated switch that provides the capability to control air-operated hydraulic power of small size. It is a pressure control switch with two double-pole, single throw, normally open contacts and one double-pole, single throw, normally closed contact.

Square D pressure switches from Schneider Electric are suited to a variety of control and protection applications in industrial, commercial and utility facilities. Pressure switches are manually and automatically resetting devices used to protect against excessive pressure drops or backups.

Our pressure switch is ideal for a wide range of applications, including positive air, gas, vacuum, oil, or fluid pressure/flow control in a flush, surface or panel-mounted configuration.