SCHNEIDER ELECTRIC 9013GHG2J62 Square D by Pressure Switch, 200/250 psi Sensor, NEMA 1 Enclosure, 1/4" NPSF, 140-175 psi Points

40/200# DPST # Sw

These pressure switches work with a variety of liquids and gases, including steam, air and water

It has a max pressure of 200/250 psi and an application of Sensor

This sensor works well in several applications such as industrial activities, food processing plants, and office buildings

It is designed to control the point of operation for small gas and air compressors, as well as generators and other air-powered equipment

This Square D by pressure switch is designed for use with a wide range of gas, liquid, and steam applications

It also comes with a 1/4" FNPT combination socket and plug that meets NEMA 1 enclosure rating

This product manufactured by Schneider Electric 9013GHG2J62 Square D by Pressure Switch, 200/250 psi Sensor, NEMA 1 Enclosure, 1/4" NPSF, 140-175 psi Points is a direct replacement for 200# and 250# per square inch switches

It voltage rating is 125/250VAC, current rating is 14A and the Actuator type is Wafer

Pressure Switches are used to close a circuit when pressure is applied

They are used to switch equipment on or off, or to start a timer

It has a 200/250 psi sensor that can be used with a variety of gases and liquids

This Square D by Pressure Switch is a 40/200# DPST # Sw which comes in NEMA 1 Enclosure

Square D pressure switch, 200/250 psi, 30 PSI SPST manual override, 1/4" NPSF inlet and outlet, NEMA 1 enclosure

Square D Pressure Switches are used to control power switches in heating, ventilation and air conditioning systems

P/N: 9013GHG2J62 Square D by Pressure Switch, 200/250 psi Sensor, NEMA 1 Enclosure, 1/4" NPSF, 140-175 psi Points

They sense pressure in the process (liquid or gas) and transmit this information to a control device

The 9013GHG2J62 Square D by Pressure Switch is a 40/200# DPST # Sw

The square d by pressure switch has a rating of 200/250 psi and comes in a # Sw 40/200

The square d by pressure switch is enclosed in a NEMA 1 type, steel-reinforced, die cast aluminum housing