SCHNEIDER ELECTRIC 9037HG30 Square D 9037 Closed-Tank Float Switch with Bushing for Power Circuit, Side Mount, NEMA 1, Left Float Position, 90-Deg. Float Rod Angle with 5" Offset, Contacts Close on Rise

FloatSwitch 50#MAX Close/Rise

With its redesigned dual mechanism, the Square D 9037 Float Switch is the best switch in its class. With a 50/500A close on rise spring design, this switch can be used as a non-resetting float supply or a level resetting discharge. Includes an integral fixed trip feature and a 3/4" conduit lug for NEMA 1 enclosure installations.

Here\'s the standard float switch for your irrigation system . It has a 50-lb. capacity and is designed to control most pumps up to 1 GPM. Available with a right, left or straight float rod configuration.

This float switch is suitable for controlling applications where a load will be ON until it reaches full supply level and then the load will shutdown. The Contact blocks close on rise and are rated for 0.1A/125VAC/30VDC. Use this float switch when your motor start device does not have provision to sense low tank level.

"Maximum values (swivel shaft, stationary bushing, 90° up position [float rises with the lower position of the float rod])"

A Commercial Float Switch can be used in any application where a water level would normally be needed to trip a circuit breaker. These switches will work with both AC and DC circuits, and are rated at 50 Ampere. Ideal for use as flow control switches in commercial swimming pools, waterparks, etc.

The Schneider Electric 9037HG30 Square D 9037 Closed-Tank Float Switch with Bushing is a direct-mount, side-positioned switch designed for applications where switch and mounting point is accessible from the top of the tank. Used in power circuit shutdown or other applications to close load contacts. Float is attached at 90-degrees through an adjacent bushing with 5" offset.

This Square D 9037 float switch has a 5" offset to accommodate hard piping applications. It has female connections and is side-tank mounted.