"2 1/2""FLOAT SWITCH
The Schneider Electric 9037HG31 is a Square D 9037 Series float switch with bushing for power circuit, side mount, NEMA 1, right float position. The Schneider Electric 9037HG31 Square D model has a 7" off-set type. It belongs to the class of 2 1/2" float switch and as such does not offer any graduations or markings on the face of the rocker arm.
The Square D 9037 float switch is a float switch designed for use with heating and cooling equipment. This 2 1/2" float switch is NEMA 1 rated and features a protective rubber boot that rotates 360°. It has a right-float position with 7" offset. It comes as a side-mount inlet and can be used with a bushing (sold separately).
The Square D 9037HG31 is a heavy-duty float switch with bushing for power circuit, side mount, NEMA 1, right float position and 90 -degree float rod angle with 7 -inch offset. It has a fixed gasket, contacts close on rise, 2 1/2" float, pressure seal bushing and NEMA 4X/7 enclosure. The Float configuration is side mount, and the Switch contacts are close on rise. This unit comes with an adjustable knob."
Although Square D is not the originator of contactor technology for float switches, we are a world leader in this industry. Our patented design features a stainless steel cylinder which translates axial movement into rotary movement of a shaft.
This float switch, 9037HG31, is supplied with a plastic actuator housing, top and bottom brass flange bushings, center wire lead and a cable tie. The contact options include WP and NC contacts. The AC coil voltage is 120/240VAC at 50/60Hz, when it closes an EOL resistor or other circuit limiting means must be selected. It has a 10-32 thread stud in the base of the motor.
The Schneider Electric Square D 9037 Closed-tank float switch with bushing, Side Mount, NEMA 1, right float position, 90-degree float rod angle with 7" offset, contacts close on rise/fall switch is designed for use as a power circuit trip switch. As a power circuit trip switch, the device interrupts the current when the liquid level reaches a given point. The switch is available in several styles to handle liquids or gases. It includes a brush assembly which may be easily replaced when worn out."
The Schneider Electric 9037HG31 Square D float switches is specifically designed for safety and protection of power circuits used in a wide range of applications. The 90-degree, side-mount, offset float is ideal for installation in rectangular tanks. System includes floats and bushing connected to a mounting bracket with mounting gasket.
Free Shipping
In stock
