SCHNEIDER ELECTRIC 9037HG31R Square D 9037 Closed-Tank Float Switch with Bushing for Power Circuit, Contacts Open on Rise, Side Mount, NEMA 1, Right Float Position, 90-Deg. Float Rod Angle with 7" Offset

"2 1/2""NPT R.A. Float Switch"

The Square D 9037 is a 2""NPT right angle, closed tank float switch with bushing for power circuits. The 9037 is designed to handle applications requiring positive or negative actuation with 0.5-0.6 in Hg differential @ 100 PSIG (each coil). This switch has mounting holes to accommodate different installation requirements.

The unique, innovative design of this round float switch makes it ideal for power application and other liquid level control applications. It features a high level of operational reliability, durability, and service life that can be expected from Schneider Electric. The Square D 9041 series float switch with side mount bushing is available in 2’’ NPT with adjustable angle rod (90-deg.) or vertical float rod (0-degree).

A single-lever, dual-zone temperature control lets you independently set the temperature for hotter or cooler water that’s ideal for washing face and upper body. This 2 1/2" NPT shut-off switch is designed to prevent power surges from entering through a side source when it shuts off. The internal mechanism of this heat transfer switch helps eliminate noise and vibration, keeping it functioning for years to come.

This Square D closed-tank float switch is suitable for general mechanical applications where low levels must be indicated. It is used primarily to control the energizing of pumps, liquids or gases."

This power circuit, contact open-on rise float switch has a 90 degree Rynoid(TM)PVDF float pivoted by a 7"" solid rod. It is typically used for heating applications for power circuits or fan applications. This float switch features a plastic body with metallized white glass face and silver tamper-proof screws, a 1/4" locknut, and two 3/8'' hex nuts. This square D float switch can only be used in non-vapor tight applications.

SCHNEIDER ELECTRIC 9037HG31R Square D 9037 Closed-Tank Float Switch with Bushing for Power Circuit, Contacts Open on Rise, Side Mount, NEMA 1, Right Float Position, 90-Deg. Float Rod Angle with 7" Offset

The Schneider Electric 9037 Series in-tank float switches are designed for use with electrical water heaters. The extended operating range electronic circuitry reduces nuisance tripping and the built-in surge protection protects against overvoltage damage. Switch features an insulated metal cover; sealed to IP 68, tested under NEMA 4X at -20°F.