SCHNEIDER ELECTRIC 9037HG35 Square D 9037 Closed-Tank Float Switch with Bushing for Power Circuit, Side Mount, NEMA 1, Right Float Position, 90-Deg. Float Rod Angle with 3" Offset, Contacts Close on Rise

FloatSwitch Nema1

The Schneider Electric 9037HG35 float switch is a nema 1, side mount, right float position, close on rise, 90 deg. float rod angle with 3 offset. It has contacts close on rise and normally open contacts if the float is not in the correct position. The 9037 has 5/8 in. diameter bushing mounting holes and a 1/6 in. bushing O D or inside diameter.

Whether you are looking for a Nema1 or Nema6 switch, Schneider Electric's Square D lineup has what you are looking for. Easy to install and maintain, rugged construction, and dependable performance make these switches a perfect fit for any application

The Schneider Electric 9037HG35 Square D 9037 2 Stage Air Over Closed Tank Float Switch has a NEMA 1 rough machined cast iron housing with thermoplastic lever. The 90-Degree float rod is 3" offset and is operated by the float directly, without an intermediate link. The 9037 2 Stage Air Over Tank Float Switch is a protected switch featuring reed contacts are open on rise and close on fall features; and have low usage current (15mA).

Square D 9037 float switch. Non-corrosive, polycarbonate switch housing and NEMA 4X stainless steel float assembly provide a flotation point that allows the switch to close when the tank is full of liquid. The contact block is adjustable from side-to-side to accommodate single or multi-wiring applications.

A Schneider Electric 9037HG35 square D bushing for power circuit. 9037-HG35 Series, bushing for power circuit, side mount, NEMA 1, right float position, 90-degree float rod angle with 3\" offset, contacts close on rise.

The G35 Series Square D 9037 Closed-Tank Float Switch with Bushing for Power Circuit has been designed to provide protection against the hazards of liquid or gas overflow in a variety of applications such as above-ground storage tanks, process vessels, and other locations where a limit switch is required.

The Square D 9037 is a general purpose, direct-acting, two position, normally open float switch. It closes on rise and opens on fall. This float switch includes setback angle bracket and bushing, if applicable.