2W Pressure Release Valve
When looking for a dependable pressure relief valve to keep your system safe, you can't go past Schneider Electric's Square D 2W Valves. These valves have a Compact design and are available for both 2- and 3-way applications. They have built in seals and an offset 0-600 PSI operating range.
This Pressure Release Valve is a Model 9049SA2B17EZ1H81 Square D by Schneider Electric. It is in a Plastic housing, 2 way, Normally Closed. This valve provides high flow Steam and Gas through the Normally Closed port and at the same time limits back pressure to prevent fire-tube boiler water from entering the condenser line through the High Pressure Port.
The 9049A12 is a 2-way pressure release valve that acts as a safety by isolating electric equipment from process pressure, maintaining safe working pressure. It also can be used to equalize, vent, or purge air from process equipment.
The Square D by Schneider Electric 9049A12 Pressure Release Valve 2 Way uses the pressure method to control a variety of air, gas, or steam applications. The 9049A12 is perfect for hospitals, labs and factories.
When a conventional pressure switch is set up to control the water flow to a city water service, in some cases, it may be required for the valve to be normally closed and then open only when the pressure rises above a certain value. This is achieved by installing a 9049A12 pressure release valve in line with the valve being controlled. The 9049A12's characteristics allow it to provide an easy solution for preventing the excess pressure of hot or cold water from entering the building where
Square D Model 9049A Series, 2-way, pressure release switch is designed for use as a gas control valve in natural gas and propane applications.
Manufactured in compliance with ASME/ANSI C37.32 and C37.33, this Pressure Relief Valve is designed of cast steel construction and ANSI Class 150. Its service rating is 175 degrees F (79 degrees C) maximum and the temperature rating is 190 degrees F (88 degrees C).