SCHNEIDER ELECTRIC ATS01N112FT -Square D 12amps 110-460v Soft Mtr Start

12amps 110-460v Soft Mtr Start

This Schneider Electric ATS01N112FT -Square D 12amps 110-460v Soft Mtr Start comes with a lot more to offer. It has a long list of great features that make this product a top seller today.

The Schneider Electric ATS01N112FT -Square D 12amps 110-460v Soft Mtr Start is used for residential HVAC control system applications, with a range of controls available to remotely monitor and adjust the temperature of a home or business. The controls are designed to work with heating and cooling systems to provide a wide-range of functionality that can be configured easily to suit a variety of purposes.

The Schneider Electric ATS01N112FT is a Square D Soft Starter used on many applications. This unit is a replacement for the original Square D AS01N17FT and also replaces the Square D N5SN112FT, N5SN113FT, N211SEF, MTS3N1B4K, MTS3N1B4TC. The SKU / Part Number has changed from AS01N17FT to ATS01N112FT. The ATS01N112FT is a Square D Soft Starter that offers 12amps of load capacity at 110v - 460vac

The Schneider Electric ATS01N112FT Square D/Emerson Network Power 12Amp Single Phase 110-460VAC Hardwired Power Supply has a Type II enclosure, a manual transfer switch (MTS) that provides power to the load both in normal and fault conditions. Suitable for installing in fume hoods or in non-hazardous locations, this soft-start power supply stays off during a power failure and turns on within 2 seconds when normal voltage returns to the input terminals. The dual voltage input of 110V – 460V AC, along with the low operating temperature range of -20 degrees Celsius

The Schneider Electric ATS01N112FT Square D Soft Starter provides smooth motor starts without the harsh in-rush current that standard solid state starters can generate. Designed for higher overload ratings up to 10 times the continuous load, the Schneider 12amp Soft Starter uses current limiting with soft start and gentle acceleration to protect motors and control panels from damage. No battery or control relay is needed, and operating costs are kept low because of its highly efficient nature.

The Schneider Electric ATS01N112FT 1 Pole, 1 Circuit, 110V Soft Starter is used for load control. Power ON/OFF can be done using a standard momentary or maintained overload switch that handle the maximum overload current of the motor.

The Schneider Electric Square D ATS01N11/2FT Soft Start is a Square D Transformer meant for commercial application. The main purpose of the product is to relieve reactive power disturbances and line frequency variations. It also protects electrical devices from damage that may result from voltages or currents in excess of setpoints. The Schneider Electric Square D ATS01N11/2FT Soft Start is manufactured using state of the art technology, ensuring reliability, dependability, and long term use. These are safeguarded against overload, short circuit and over temperature conditions.