SCHNEIDER ELECTRIC LC1D18B7 -Square D 24VAC 600VAC 18A CONTACTOR

24VAC 600VAC 18A CONTACTOR

Marshall Electronics' SCHNEIDER ELECTRIC LC1D18B7 is a 24VAC 600VAC 18A CONTACTOR. It can be used as a load center for motor starters or close loop control of lighting, communications equipment and other low voltage devices.

The Square D LB2E Series of Contactor 24VAC 600VAC 18A CONTACTOR is the perfect option for those Do-It-Yourselfers who want a reliable and cost effective way to protect their electrical circuits. These Gate Operators use solid state electronics and are easy to install.

The LC1D18B7 -Square D 24VAC 600VAC 18A CONTACTOR is a solid-state electronic device designed to switch at a nominal load of 18A and 600 Vac. This contactor features precise control of the on-delay setting and offers fast, dependable performance in both AC and DC circuits. The switching function is performed by means of a silicon controlled rectifier constructed into the unit. Energy is controlled by modulating the current in an internal inductance coil, which causes it to move between two stationary contacts.

Our ELC1D18B7 Square D 24VAC 600VAC 18A Contactor is rated for 600VAC and 600 VDC coil. It has a built-in power factor correction circuit that reduces harmonic current distortion; it has been designed to operate reliably in systems with large- sized motors, despite low levels of voltage harmonics. With a rating of 20A at AC line voltage, it is recommended for use on air conditioners, heat pumps, electrical boxes and commercial equipment such as kitchen appliances, vending machines, refrigerators and walk-in coolers.

The Schneider Electric LC1D18B7 Square D Type 18 1 Pole 600VAC 18A Contactor can be used to limit an electrical load to a specific amount. The device is made with a steel body that is designed to withstand exposure to harsh environments, and it features a mounting channel that makes it easy to install into the desired setup. These contactors are available in multiple sizes, and they can be ordered with optional reset mechanisms that will restart the device after it shuts off.

The LC1D-18B7 is a solid state, self-contained, single pole 8 Amp contactor that operates from a 24 Vac or a 600Vac supply. It is rated for 600 Vac applications and is designed to replace contactors in medium horsepower motors. Generally, it can be used as an electronic overload for any application that requires low voltage quiet control such as: Uninterruptible power supplies (UPS), computer systems, plant controls, military applications, and industrial plants.

Here's a top quality Square D On-Off Snap action Contactor that has been designed to meet or exceed OEM specifications for voltage, current and phase combination. Designed for use in applications such as lighting, HVAC/R and other general applications where control of the load or machine requires on or off of the AC power.