SCHNEIDER ELECTRIC LC1D18G7 IEC Magnetic Contactr, 120VAC, 18A, 1NC/1NO

120V 18A 3Pole Contactor W/Aux

The Schneider Electric LC1D18G7 IEC Magnetic Contactor is an 18 Amp, 120V 3 Pole Contactor with Aux. The aux can be programmed as a normally open or normally closed contact in discrete or proportional mode, and the first pole can be configured as normally open or normally closed.

The LC1D18G7 is a 3-Pole, 120-Volt, 18-Amp Contactor. It has an AC coil voltage of 285-Y AC and a DC coil rating of 18.0 Volts at a coil resistance of 50 ohms. The contactor features a normal current rating of 85/65 Amps. The terminals accept bolt mounts, wire leads, or terminal blocks. It is also available with NO ONLY contacts for control of fuel pumps equipped with

DIN-rail mounted 18A/125VAC, 3-Pole, AC Contactor . The LC1D18G7 rugged contactor has been designed specifically for switching inductive and resistive loads in harsh industrial environments, including very high operation frequencies. Complying with the industry's safety standards, this contactor is UL3253 certified for use in hazardous locations and is explosion proof (Exd IIB/IP40).

The Schneider Electric LC1D18G7 IEC Magnetic Contactor allows you to control large loads. It has a current capacity of 18 Amps and is 3 Pole with 1 normally open (NO) and 1 normally closed (NC). This magnetic contactor is portable, allowing for easy travel from location to location and weighs only 4.29 lbs per unit. With a voltage rating of 120VAC, this small magnetic contactor is an ideal addition to any home or business.

The Schneider Electric LC1D18G7 1NC/1NO IEC Master Slave Contactor is factory preset for 1 pole, 120VAC, 18 amp AC operation. It can easily be changed to 1 pole, 120VAC, 8 amp or 24vdc or 10 amp AC. A Rocker Switch must be substituted to change the rating. Momentary, normally open contacts are used in all devices it controls.

Designed for use with an electric motor starter, this contactor offers 120VAC 18A in one pole and one normally closed (1NC) and one normally open (1NO) contacts. It has a maximum operating voltage of 250VAC at 60Hz.

Schneider Electric LC1D18G7 IEC Magnetic Contactor, 120VAC, 18A, 1NC/1NO