SCHNEIDER ELECTRIC LC1D40G7 3 pole, 40 AMP contactor rated at 10 H.P. @ 230 volt/ 30 H.P. @ 460 volt 3 Phase and has a 110/120vAC coil

120V 40A 3Pole Contactor W/Aux

When you need to add an auxiliary contact to a circuit, turn to Neuco Inc

You can choose from multiple ranges so you can find the perfect option for your system

When paired with the 9999SX8 contactor (one channel, 8A), this provides an opportunity to create a "remote" activation point for the contactor

This kit is used for connecting an auxiliary device to the 9999SX8 controller

The Schneider Electric 9999SX8 AuxContactKit 1NO/1NC is a kit that contains two contact blocks and two auxiliary contacts, with one normally open and one normally closed contacts

e

No description available

Each one is made from strong materials that won’t break down when they’re exposed to the elements

12V)

The 9999SX8 Controller can supply up to two auxiliary contacts

The remote activation point can be used to switch devices that may be in hard to reach places or devices that do not have a traditional source of power (i

Schneider Electric 9999SX8 AuxContactKit 1NO/1NC for SX1000 Series Contactor, SX2000 Series Contactor, SX5000 Series Contactor, SX8000 Series Contactor

Part Number: 9999SX8 AuxContactKit 1NO/1NC

The maximum current allowed on each of the auxiliary contacts is 15 amperes at 230VAC, 50VDC

The Schneider Electric 9999SX8 AuxContactKit 1NO/1NC is a digital auxiliary contact module for the SX8 family

These auxiliary contacts are used to monitor circuit status

The Auxiliary Contacts Kit consists of two Auxiliary Contacts and one Auxiliary Actuator

We carry an extensive line of Schneider Electric 9999SX8 AuxContactKit 1NO/1NC

The maximum current for each of the auxiliary contacts is 10 amperes with a voltage rating of 250VAC, 50VDC

These devices are easy to install and can handle up to 16 amps

The Auxiliary Contact Kit can be used with the 9999SX8 panelboard to extend its functionality by configuring it as a control center to manage several devices (motors, pumps, lighting loads) through a single command or by using it as an interface to connect two Schneider Electric or third-party control panels and devices

The 9999SX8 is a Class 2 power contactor with a maximum voltage of 600VAC, current of 20A, and maximum horsepower of 5HP

Schneider Electric 9999SX8 AuxContactKit 1NO/1NC

The Schneider Electric 9999SX8 Aux Contact Kit (1NO/1NC) is a aux contact kit that contains one auxiliary contact and one auxiliary circuit breaker