SCHNEIDER ELECTRIC LC1K0910B7 -Square D 24V 3P CONTACTOR

24V 3P CONTACTOR

Contactor LC1K0910B7 also known as Square D 1871 is used to keep current flowing through a circuit until it is turned off. It's essentially an interrupting device that protect circuits from overloading and potential overheating. These 24V 3P Contactors are often used in air conditioning units, electrical panels, and more.

The Schneider Electric LC1K0910B7 Square D 24V 3P Contactor is designed for everyday use with a high level of reliability. This contactor has a current interruption of 100 amps and has an adjustable timing feature that allows you to choose the length of time the contacts will remain open.

The Schneider Electric LC1K0910B7 Square D® 3P 24VAC contactor is a member of the Ucb range, and features Push-Pull circuit breaker reset, Class B insulation, and an installation with forced air cooling. With an operational voltage of 24V AC, continuous current rating of 7 Amp, and maximum switching capacity of 8A @ 240V AC, the Schneider Electric LC1K0910B7 3P contactor has a quiescent current at 25°C of 0.46A to offer the user a low running cost. Legrand Ucb Rated For Use In Outdoor

A 3-Pole, 24V AC Contactor. The LC1K0910B7 features double throw on all poles, 10 amps at 125/250VDC and is UL listed. This contactor is designed for applications such as HVAC/Refrigeration, Solenoid Interlock Sensing/Fault Protection, Solid State Relays, Motor Control and Pump Control. The Schneider Electric offer a full range of contactors compatible with their Conext ComConfig Panel Family.

The CONTACTOR LC1K0910B7 is a contactor in the SCHNEIDER ELECTRIC range of 0.9 to 1.6 A in rated current and is used for switching small motors.

The LC1K series provides two ratings up to 35A at 14V and 15A at 24Vdc copper terminals, higher than the rating of standard single-phase contactors.

The LC1K0910B7 is a contactor utilizing an electro-magnetic buildup system for 24 VAC applications.