SCHNEIDER ELECTRIC VK-7223-202-4-5 (Barber Colman) "3/4""NC 5-10# 5.5CV BRASS VLV"

"3/4""NC 5-10# 5.5CV BRASS VLV"

5% or less over a wide temperature range

ETD800-6 is a 10K thermistor with a 10mm lead spacing

ETD800-6 6” 10K OHM Thermistor w/Shunt

ETD800-6 6" 10K OHM Thermistor w/Shunt {Barber Colman}

The ETD800-6 6" 10K OHM Thermistor with Shunt is a thermistor typically used in the measurement of process temperatures

The ETD800-6 6" 10K OHM Thermistor with Shunt is designed to work with Barber Colman products

Thermistor for ETD800-6: NTC, 10K ohm

A thermistor is composed of two different types of metal-oxide semiconductors (MOS)

This thermistor can be used to sense air, liquid or gas temperatures, as well as process temperatures where ambient conditions are not required

The ETD800-6 thermistor is a rugged thermistor designed for industrial and HVAC applications

Designed for the harsh environments of the freezer temperature ranges, this part features an operating temperature range from -40°C to 190°C and a long term stability of 0

Thermistor is a component used in temperature measurement and control

This device is designed to be used in applications that require fast response

SCHNEIDER ELECTRIC ETD800-6 6" 10K OHM Thermistor w/Shunt {Barber Colman}

The Thermistor can sense temperatures ranging from -22 to +200 degrees centigrade

This thermistor has ten leads that are numbered 1 to 10, with six inches wire length between leads

Withstanding continuous operation at 125°C and short term exposure up to 135°C, this part is ideal for freezer applications

The resistance of the thermistor will be dependent on the temperature

Schneider Electric ETD800-6 6" 10K OHM Thermistor w/Shunt {Barber Colman}

It's a 10K Ohm NTC thermistor with a built in shunt

10K OHM THERMISTOR WITH SHUNT - 6 INCH SCHNEIDER ELECTRIC ETD800-6