SCHNEIDER ELECTRIC VS-7213-814-4-10 1 1/2" 2W 24V 28CV 20-30VDC SR {Barber Colman}

1 1/2" 2W 24V 28CV 20-30VDC SR

It was time to upgrade their old dampers, so we sent them some of our top of the line MetroPac dampers

It is activated by a photoelectric cell and has a sensitivity adjustment knob with two levels of light available

This mass pivots in an arc and at a specific position it activates the valve

The Schneider Electric 30183 (Barber Colman) MP-5433 is a 24V SPRING RETURN MODULATING DAMPER

This 24V spring return modulating damper is perfect in applications that require the ability to maintain a setpoint while still having the ability to adjust the dampening of the load

This unit has a small air volume and can effectively control air flow in small spaces when it's used in combination with other dampers or stop valves

The damper is designed to dampen vibration and motion in applications where a spring return type damper may be subject to shock loads or vibration loads that would affect the accuracy of its response

SR 2-12vdcStart15# The Schneider Electric 30183 (Barber Colman) MP-5433 24vDampAct

The dampers are typically used to regulate supply air when the temperature of the room will be at or below 80 degrees, and are used as a supplement to mechanical cooling

The Schneider Electric 30183 (Barber Colman) MP-5433 24v Damp Act

It offers superior operating range, ease of installation and maintenance, operational reliability and longer life when compared to spring-return dampers with external power supply solution

This unit comes to us from the good people at Schneider Electric

The output current, the operating damping and the movement are proportional to each other

They have stated that all of the dampers have been installed and they are very happy with our product

Schneider Electric 30183 (Barber Colman) MP-5433 24vDampAct

The Schneider Electric 30183 (Barber Colman) MP5433 is a 24V SPRING RETURN MODULATING DAMPER

SR 2-12v dc Start 15#, is a spring return modulating damper

SR 2-12vdcStart15# is a 24V SPRING RETURN MODULATING DAMPER from the Schneider Electric 30183 (Barber Colman) product family

This damper is spring return and provides for full-cycle operation

It is designed for use as an actuator to control damping in HVAC systems

It will operate either normally open or normally closed

The damper is ideal for residential applications, particularly in new construction and replacement installations

The Schneider Electric 30183 (Barber-Colman MP-5433) is a spring return modulating damper which allows for complete control of airflow and humidity

Applications include flexible ducts and plenums, heating ducts, supply vents, return vents and air switches

It has a 1/4-inch threads, and fits into a standard 1/2-inch by 14-inch housing

This includes items like window air conditioners, variable fan speeds, industrial type fans and even as a variable speed pump control

The damping action is created by the rotation of a centrifugal mass of 4 1/4 pounds

The Schneider Electric 30183 (Barber Colman) MP-5433 24V Spring Return Modulating Damper is a damper designed for use in modulating applications, generally in HVACR systems

The MP-5433 is a 24V Damp Actuated Spring Return, two to twelve volt DC start, fifteen pound nominal air spring, centrifugal type damper

Designed to control the speed of fan motors in heating/cooling and ventilation systems, the MP-5433 is a 24V SPRING RETURN MODULATING DAMPER