SEACHOICE
SEACHOICE 18751 GARBOARD DRAIN PLUG-PIPE 1/2
" This is a 1/2" diameter drain plug-pipe. It is made of brass and has a black finish. It is used to plug a drain pipe to prevent water from flowing out.
My Account
If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New AccountGARBOARD DRAIN PLUG-1/2 (BULK
PVC plugs for the GARBOARD, FLEXLINE and DRAINPLUG series are used to keep liquids and debris out of the drainable well on cruising sailboats. They are spring loaded for easy removal, and fit into the 15/16" hole, as shown in yellow in the picture above.
Garboard drain plug for 12' -18' boat. Pop-up type. This product is an old stock item, and has been replaced by GPP 18750S, which is identical to our new GPP 18750B. It has not been produced for several years.
Gardco's patented 18-750 #2 SEACHOICE® Garboard Drain Plugs are hand-tied from 100% Spectra®/Dyneema® fiber line. With an internal diameter of .375 in (9.5 mm), these drain plugs feature a 100% waterproof double bellows design. They are completely transparent to permit viewing of accumulated debris. Each drain plug is knotted on both ends for strength and extra security, and tagged for easy identification. The unique design allows the plugs to be flush installed without creating splash shields that trap garbage and debris
The SeaChoice Garboard Drain Plug fits all SeaChoice/Wavewalk 18750 model kayaks.
This 1/2 inch size is the standard for most residential and commercial drains such as sinks, tubs, showers, bidets, toilets and floor drains. This durable cast iron drain plug has a serrated edge to prevent it from turning in the drain and to provide a better seal on the drain opening. The serrated edge eliminates the possibility of accidentally turning the plug and making it easier to remove. This drain is simple to install using a plumber's snake or any other pipe wrench.
A fitter's dream, this drain plug works with copper, CPVC, cast iron and PEX tubing. Its plastic cover protects the gasket and when removed allows you to clean the hole with water jet before installing the plug.
Our hole covers fit standard 1/2? holes which can be drilled either square or round. They are made of a heavy duty gauge rigid plastic, which measures 3 inches in diameter. They are easy to use and install and won't corrode in the water like metal plugs will. We also carry a full line of accessories for virtually any size hole out there including gaskets, caps, flanges, etc.