Shark Industries Ltd SI70B Shark Industries PN- Clamping Silencer for Accu-turn and FMC Brake Lathes, Chip Deflecting

CHATTER DEPRESSING/UNIVERSAL SILENCER

Clamp-On Silencers are used to reduce the amount of chatter or noise that is generated while turning a part on your lathe.

The Shark Industries SI70B Silencer. Chatters, squeals and noise are a thing of the past with this unique design which is used as a universal silencer for many different machines. Due to its construction this silencer is easy to install and requires no special set-up when changing from lathe to lathe. The SI70B is made of high quality heat treated steel, thereby ensuring durability and lasting service life.

This silencer has a chip deflecting design that efficiently reduces noise levels. The clamping feature fits all models of the Accu-Turn and FMC turning centers. The Shark Industries SI70B is for use with all turning centers. It will also work on other machines with a 3/4in bore.

Suppress chatter and side-loads for faster, quieter turning results with the Shark Industries SI70B Universal Clamping Silencer. This versatile silencer works on any brand of lathe that uses a 3/4" diameter mount. Its clamping system allows for quick assembly and easy on-off switching, so you can switch between different machines with no hassle. The SI70B has a smaller diameter than other silencers, which allows it to fit into tighter spaces and gives it a lower profile to maneuver around obstructions.

Accu-turn and FMC Brake Lathes

Silencers are especially useful in shops where there are adjacent offices, or where production areas are adjacent to noisy machine rooms and other workcenters that require complete silence.

The SI70B Silencer for Accu-Turn and FMC Brake Lathes, Chip Deflecting is a universal silencer that can be used on four different models. With the SI70B Shark Industries PN- Clamping Silencer for Accu-turn and FMC Brake Lathes, Chip Deflecting, you can stop the chatter instantly. Keep your work surface clean using this convenient tool. This product is designed to meet the highest quality standards available while ensuring excellent value for money.

The SI70B silencer is used to quieten the chatter vibration of the chuck on machines such as, but not limited to: FMC and Accuturn Brake Lathes. Please be aware that by installing this device it cannot eliminate the chatter caused by a worn chuck or spindle bearings. If your chatter is excessive, this may be a sign that your machine requires service. This product is manufactured in China and will be shipped via UPS Ground to most places in the continental U.S.

The Shark Industries SI70B Universal Silencer clamps on to most brands of vertical and horizontal spindle turning centers and FMC/Accu-turn/Roughneck Brake lathes. The SI70B silencer is designed to control chatter by diverting the chips away from the tool. Chatters are reduced or eliminated entirely, assuring a more accurate machining process.

The Shark Industries SI70B silencer is machined from high grade aluminum and designed to fit the Accu-Turn and FMC Brake lathes. It also fits most other lathe chucks with a diameter of 1.5" - 2". The clamping system allows for quick, positive tightening, even under a full load.