SIEMENS 3RV2021-1EA10 Industrial Controls MOTOR STARTER 2.8-4 AMP

MOTOR STARTER 2.8-4 AMP

Industrial Controls offers a complete line of starters including SIEMENS 3RV2021-1EA10 Industrial Controls MOTOR STARTER 2.8-4 AMP. We also offer all the auxiliary equipment and accessories needed to mount and install an electric motor starter.

The 3RV202-1EA10 is a split phase 2.8 - 4 Amp motor starter. It has a C9000 rotor and terminal markings of C9000 and "A B". This makes it perfect for use in renewable energy installations such as wind turbines, solar modules and hydro schemes.

The 3RV2021-1EA10 is a 2.8-4 Amp industrial control with thermal overload cutout, gray plastic enclosure, and double-insulated construction.

The Siemens 2.8 to 4 Amp 1-Phase High Power Industrial was specially designed for high performance applications that demand reliable and cost effective operation. It is suitable for many industrial applications, including those that require frequent or continuous starting, where longer duty cycles are required. The 3RV series has a wide variation of circuit voltages available, the capability of mounting the overload relay externally and a plug-in overload assembly with integrated thermal protector.

The MOTORSTARTER is designed to protect the load against fluctuations of overload, high temperature and low temperature. It also protects the switching equipment against overload current caused by a short-circuit on the motor.

This motor starter is a sealed, compact three-phase centre-tapped motor starter designed to protect a motor from overload and stall conditions.

This Siemens motor starter replaces your old motor starter, increasing the starting current of your motor. This compact starter provides excellent overload protection, long service life and an LED status indicator for replacement purposes.

When top equipment performance and high uptime are required, our motor starters and contactors deliver. Equipment Protection Class H, I and T to NEMA standards ensure safe and reliable start performance. Rigid copper bus bar provides exceptional heat dissipation capabilities for greater thermal stability and extended service life. Differential thermal overload protection with automatic reset protects against short circuits, overloads and excess arcing.

With a 3-speed range for maximum versatility and fast adaptive starting, the Siemens 3RV2021-1EA10 motor starter is ideal for operating common pumps and group-control motors in factories and buildings. It has a power factor of 0.8, an overload protection rating of 10 A, and a thermal protection rating of 140 °C. For added safety, it monitors the temperature of the air flow that cools the stator windings via a thermistor.

The 3RV2021-1EA10 is a 10 kVA fused motor Starter. The 3RV2021-1EA10 provides an immediate start to the motor with no warm-up time, while drawing less current than conventional motor starters. This feature makes the 3RV2021-1EA10 ideal for high frequency control applications. The integrated system also includes a communication board option to implement communication profiles, including IEC 61131-3 communication profiles.

The 3RV series diode bridges are designed for use as line starters, motor starters, relays, etc. They are available in a wide range of sizes for applications covering 600-1800 Vac and 50-400 Hz.

Features: