SIEMENS 147-2000 Positioning Relay for POWERS Pneumatic Damper Actuators, Silver

POWERS POSITIONING RELAY

The Siemens 147-2000 Positioning Relay has been designed as a replacement part for POWERS Pneumatic Damper Actuators. The part is a silver relay that requires installation by a licensed technician.

Designed for use with POWERS Pneumatic Damper Actuators, this Positioning Relay enables independent positioning of left and right dampers. It also allows for multiple actuator operation, as well as automatic failure-to-close protections.

Keep this Siemens positioning relay in stock with our POWERS positioning relays! The 147-2000 features a silver body and is intended for pneumatic damper actuator control. You can install this item quickly and easily to maintain your processes reliably and efficiently.

The Siemens Positioning Relay is designed to work with the POWERS Pneumatic Damper Actuators. This relay acts as a starting and stopping switch for the actuator and increases energy efficiency.

Positioning Relays from POWERS are designed to be used with their pneumatic damper actuators to position valves and dampers in a wide variety of applications. Their robust design certifies the reliability for uninterrupted service.

The Siemens 147-2000 Positioning Relay is designed for use with Powers air and gas dampers. With short electrical leads, the relay can be installed in the panel board without concern for wire harness clearances. It's silver anodized aluminum alloy housing is resistant to corrosion. UL listed, it is suitable for indoor or outdoor installations.

The Siemens 147-2000 relay mounts on the POWERS pneumatic damper actuator, and connects to a wiring harness using a plug-in connector. The positioning relay provides many benefits that enable users to easily control pneumatic dampers.

This Siemens position relay for connections to POWERS Pneumatic Damper Actuators has been engineered to ensure reliable positioning in closed and open loop applications.

This relay offers a 3-position, normally open, DPDT output for positioning of pneumatic dampers. This mounting plate is for use with TK101 and TK102 POWERS switches. A switch/relay base assembly is required to use this plate.

Relay is directly mounted on a POWERS Pneumatic Damper Actuator, so no separate wiring is needed. Relay has Pneumatic port for connection to damper actuator regulator screw and electrical connectors for connection to external components (vacuum switch, control unit and power drive).

This Siemens positioning relay makes your machines easier to use. The compact design allows for a miniaturized mechanical design that simplifies the engineering of the machine, provides a convenient solution and an easy handling of the configuration.

After 20 years, the positioner is still recognized as a very reliable device which designers turn to again and again. The new positioner, with its completely redefined electronics and smart design, is setting new benchmarks for performance and reliability.