SIEMENS 599-02061 Building Technologies 59902061 3/4" 2w NO SS 6.3cv EQ% Valve

"3/4"" 2w NO SS 6.3cv EQ% Valve"

This 3/4"" 2w NO SS 6.3cv EQ% Valve is used in Hot Water Booster Homes, including newer, efficient homes with the single point pressure relief (SPPR) system. The valve is unaffected by pressure changes during regular operation of SPPR systems (i.e. cold weather and varying hours of use). Two-way flow valves are not to be used for domestic hot water booster systems.

The Siemens® Building Technologies 3/4"" 2w NO SS 6.3cv EQ% Valve is a nonrecessed cartridge valve classified for use with low e ctrl equipment.

3/4" 2w NO SS 6.3cv EQ% Valve. Screwed Terminals, Externally Biased, Safety Relief not Standard, Pilot Device Not Included: Yes, Swagelok Mounting System: No, Union Thread: No."

This 3/4" 2w NO SS 6.3cv EQ% Valve from Siemens Building Technologies is designed to handle a maximum flow of 30 gallons per minute and an effluent temperature of 41 degrees Fahrenheit. One key feature is that the valve can achieve a maximum pressure of 250 psi at 60 PSI differential. With 5/16"" polypropylene shut-off, the valve has brass with spring steel bonnet construction for durability.

The Siemens Building Technologies 599-02061 3/4" 2w NO SS 6.3cv EQ% Valve is a fully molded, direct operated, normally closed solenoid valve which is used for magnetically operated processes. This product solves issues in vacuum, power, industrial, and continuous flow applications where precise flow control is necessary and reliability top notch. The patented AutoFlush® technology protects the system from clogging by automatically flushing solids away from the drain hole.

The PipeTite EQ Solenoid Valve is a leading performance solution for a wide range of applications. The B580 plug-in solenoid valve is a microprocessor-based, solid state electronic system providing precise process control and assurance with fast response times.

Ideal for residential and light commercial applications, this ¾" solenoid valve with NO or N (normally open) is made from brass. It features a stainless steel diaphragm and seat, a self contained snap ring plumbed design, a 16 mm standard pipe size, a water inlet stem and an air vent stem. This model is also 1-piece of galvanized carbon steel and has a groove seat design. The flow control percentage for this valve is 50% with a maximum pressure of 125 psi (8 bar).